Bidirectional 3G/HD/SD-SDI over Fiber

Fiberlink® 3352 3G/HD/SD-SDI Series

The Fiberlink 3352 Series allows you to transmit bidirectional 3G, HD or SD-SDI as per SMPTE 424M-2006, 292-2006 and 259M-2006, with or without embedded audio and data, as well as DVB-ASI over one single mode fiber. Each of the two channels of 3G/HD/SD-SDI are independent allowing you to transmit different SDI formats in each direction.

3G/HD/SD-SDI over Fiber

Fiberlink® 3350 3G/HD/SD-SDI Series

The Fiberlink 3350 Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259, with or without embedded audio and data, as well as DVB-ASI over one single mode or multimode fiber. Signals are equalized and re-clocked prior to fiber optic transmission. The 3350 transmitter features a re-clocked and equalized SDI loop through and the 3351 receiver features two re-clocked and equalized SDI outputs.

1x4 3G/HD/SD-SDI Optical/Copper Hybrid Optical Distribution Amplifier

Fiberlink® 8204 3G/HD/SD-SDI Optical Distribution Series

The Fiberlink 8200 Series of optical distribution amplifiers accept a 3G/HD/SD-SDI or DVB-ASI signal via BNC or its optical input and outputs it on four independently driven optical fibers. A convenient front panel switch allows the operator to toggle between the copper and the optical input sources.

1x3 3G/HD/SD-SDI Optical/Copper Hybrid Optical Distribution Amplifier

Fiberlink® 8203 3G/HD/SD-SDI Optical Distribution Series

The Fiberlink 8200 Series of optical distribution amplifiers accept a 3G/HD/SD-SDI or DVB-ASI signal via BNC or its optical input and outputs it on three independently driven optical fibers. A convenient front panel switch allows the operator to toggle between the copper and the optical input sources.

1x2 3G/HD/SD-SDI Optical/Copper Hybrid Optical Distribution Amplifier

Fiberlink® 8202 3G/HD/SD-SDI Optical Distribution Series

The Fiberlink 8200 Series of optical distribution amplifiers accept a 3G/HD/SD-SDI or DVB-ASI signal via BNC or its optical input and outputs it on two independently driven optical fiber. A convenient front panel switch allows the operator to toggle between the copper and the optical input sources.

1x1 3G/HD/SD-SDI Optical/Copper Hybrid Optical Distribution Amplifier

Fiberlink® 8201 3G/HD/SD-SDI Optical Distribution Series

The Fiberlink 8200 Series of optical distribution amplifiers accept a 3G/HD/SD-SDI or DVB-ASI signal via BNC or its optical input and outputs it on one independently driven optical fiber. A convenient front panel switch allows the operator to toggle between the copper and the optical input sources.

3G/HD/SD-SDI & 4 Channels of Analog Audio over Fiber

Fiberlink® 3380 3G/HD/SD-SDI & Analog Audio Series

The Fiberlink 3380 Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259 with the ability to embed up to 4 channels (2 pairs) of analog line level audio. Convenient switches on the 3380 Series transmitter allow the operator to embed each of the two pairs of audio independently, to strip previously serialized audio, or to pass it through without modification. At the receive end of the fiber optic link, the operator can decide which audio pairs they need de-embedded.

3G/HD/SD-SDI, Ethernet & 2 Channels RS-Type Data over Two Fibers

Fiberlink® 3372 3G/HD/SD-SDI & Data Series

The Fiberlink 3372 Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259 with the ability to transmit 10/100 Base-T Ethernet and two channels of RS-Type data over two multimode fibers. All data channels are available simultaneously and convenient switches on the 3370 Series transmitter allow the operator to configure each of the two pairs of data independently.

3G/HD/SD-SDI, Ethernet & 2 Channels RS-Type Data over Fiber

Fiberlink® 3370 3G/HD/SD-SDI & Data Series

The Fiberlink 3370 Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259 with the ability to transmit 10/100 Base-T Ethernet and two channels of RS-Type data over one single mode fiber. All data channels are available simultaneously and convenient switches on the 3370 Series transmitter allow the operator to configure each of the two pairs of data independently.

3G/HD/SD-SDI & 4 Pairs AES/EBU Audio over Fiber

Fiberlink® 3360 3G/HD/SD-SDI & AES/EBU Audio Series

The Fiberlink 3360 Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259 with the ability to embed up to 8 channels (4 pairs) of AES/EBU digital audio. Convenient switches on the 3360 Series transmitter allow the operator to embed each of the four pairs of audio independently, to strip previously serialized audio, or to pass it through without modification. At the receive end of the fiber optic link, the operator can decide which audio pairs they need de-embedded.

Convert Optical 3G/HD/SD-SDI to DVI

Fiberlink® 3355 3G/HD/SD-SDI to DVI Series

The Fiberlink 3355 Series receives SMPTE standard 3G, HD or SD-SDI signals transmitted from the Fiberlink 3350, Fiberlink 3360, or Fiberlink 3380 Series transmitters, with or without embedded audio, and converts the baseband output to DVI. The Fiberlink 3355 receiver provides an independent audio output providing you with the ability to separate your audio and video signals.

Convert Optical 3G/HD/SD-SDI to HDMI

Fiberlink® 3353 3G/HD/SD-SDI to HDMI Series

The Fiberlink 3353 Series receives SMPTE standard 3G, HD or SD-SDI signals transmitted from the Fiberlink 3350, Fiberlink 3360, or Fiberlink 3380 Series transmitters, with or without embedded audio, and converts the baseband output to HDMI. The Fiberlink® 3353 receiver provides an independent audio output providing you with the ability to separate your audio and video signals. The audio is also embedded into the HDMI cable.

DVI & RGB Computer Video to 3G/HD/SD-SDI Scan Converter

Scan Do® 1298 HD

The all-new Scan Do HD Scan Converter converts Digital DVI and Analog RGB, atresolutions up to 1920 x 1080, to 3G/HD/SD-SDI output, providing broadcast-quality video images. It supports all SMPTE 3G-SDI output resolutions up to 1080p per SMPTE 424M-2006, HD-SDI outputresolutions up to 1080i per SMPTE 292 and SD-SDI resolutions (NTSC and PAL) per SMPTE 259, making it themost versatile model in the Scan Do family.

3G/HD/SD-SDI & 4 Channels of Analog Audio over Fiber

Fiberlink® 3380 3G/HD/SD-SDI & Analog Audio Series

The Fiberlink 3380 Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259 with the ability to embed up to 4 channels (2 pairs) of analog line level audio. Convenient switches on the 3380 Series transmitter allow the operator to embed each of the two pairs of audio independently, to strip previously serialized audio, or to pass it through without modification. At the receive end of the fiber optic link, the operator can decide which audio pairs they need de-embedded.

3G/HD/SD-SDI & 4 Pairs AES/EBU Audio over Fiber

Fiberlink® 3360 3G/HD/SD-SDI & AES/EBU Audio Series

The Fiberlink 3360 Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259 with the ability to embed up to 8 channels (4 pairs) of AES/EBU digital audio. Convenient switches on the 3360 Series transmitter allow the operator to embed each of the four pairs of audio independently, to strip previously serialized audio, or to pass it through without modification. At the receive end of the fiber optic link, the operator can decide which audio pairs they need de-embedded.

3G/HD/SD-SDI Four Channel Analog Audio De-Embedder

Copperlink™ 2381 3G/HD/SD-SDI & Analog Audio Series

The Copperlink 2381 Series allows you to de-embed up to 4 channels (2 pairs) of analog line level audio from a 3G, HD or SD-SDI video signal in accordance with SMPTE standards. Convenient switches on the Copperlink 2381 de-embedder allow the operator to choose wether to extract or mute audio on a channel by channel basis.

3G/HD/SD-SDI Four Channel Analog Audio Embedder

Copperlink™ 2380 3G/HD/SD-SDI & Analog Audio Series

The Copperlink 2380 Series allows you to embed up to 4 channels (2 pairs) of analog line level audio into a 3G, HD or SD-SDI video signal in accordance with SMPTE standards. Convenient switches on the Copperlink 2380 embedder allow the operator to embed each of the two pairs of audio independently, to strip previously serialized audio, or to pass it through without modification, all on a pair by pair basis. Previously serialized data is left intact.

3G/HD/SD-SDI, Ethernet & 2 Channels RS-Type Data over Two Fibers

Fiberlink® 3372 3G/HD/SD-SDI & Data Series

The Fiberlink 3372 Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259 with the ability to transmit 10/100 Base-T Ethernet and two channels of RS-Type data over two multimode fibers. All data channels are available simultaneously and convenient switches on the 3370 Series transmitter allow the operator to configure each of the two pairs of data independently.

3G/HD/SD-SDI, Ethernet & 2 Channels RS-Type Data over Fiber

Fiberlink® 3370 3G/HD/SD-SDI & Data Series

The Fiberlink 3370 Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259 with the ability to transmit 10/100 Base-T Ethernet and two channels of RS-Type data over one single mode fiber. All data channels are available simultaneously and convenient switches on the 3370 Series transmitter allow the operator to configure each of the two pairs of data independently.

Convert Optical 3G/HD/SD-SDI to DVI

Fiberlink® 3355 3G/HD/SD-SDI to DVI Series

The Fiberlink 3355 Series receives SMPTE standard 3G, HD or SD-SDI signals transmitted from the Fiberlink 3350, Fiberlink 3360, or Fiberlink 3380 Series transmitters, with or without embedded audio, and converts the baseband output to DVI. The Fiberlink 3355 receiver provides an independent audio output providing you with the ability to separate your audio and video signals.

Convert Optical 3G/HD/SD-SDI to HDMI

Fiberlink® 3353 3G/HD/SD-SDI to HDMI Series

The Fiberlink 3353 Series receives SMPTE standard 3G, HD or SD-SDI signals transmitted from the Fiberlink 3350, Fiberlink 3360, or Fiberlink 3380 Series transmitters, with or without embedded audio, and converts the baseband output to HDMI. The Fiberlink® 3353 receiver provides an independent audio output providing you with the ability to separate your audio and video signals. The audio is also embedded into the HDMI cable.

Hi-Res RGB with Stereo Audio over two Fibers

Fiberlink® 7250 Hi-Res RGB & Stereo Audio Series

The Fiberlink 7250 Series digitally transmits high resolution RGB (up to WUXGA) and stereo audio using two single mode or multimode fiber optic cores at 1310 nm wavelength. The system supports Supports VGA, SVGA, XGA, WXGA, SXGA, SXGA+, UXGA and WUXGA (640 x 480 up to 1920 x 1200) and HDTV resolutions of 480p, 720p, 1080i and 1080p (RGBHV format only).

RGB with Stereo Audio Optical Receiver with 4 Baseband Outputs and 1 Optical Output

Fiberlink® 7227 RGB & Stereo Audio Series

The Fiberlink® 7227 is a receiver with an optical loop-thru for use with any of the 7220 Series transmitters. It offers 4 baseband outputs along with 8 channels of stereo audio and an optical loop-thru.

The Fiberlink 7220 Series digitally transmitshigh-resolution RGB (up to WXGA) and stereo audio over one single modeor multimode fiber optic core at 1310 nm wavelength. Ideal forpoint-to-point, point-to-multipoint and drop-and-repeat applications,it supports VGA, SVGA, XGA and WXGA (640 x 480 up to 1366 x 768 ) andHDTV resolutions of 480p, 720p, and 1080i (RGBHV format only).

1x12 RGB with Stereo Audio Optical Distributor

Fiberlink® 7226 RGB & Stereo Audio Series

The Fiberlink 7224 transmitter offers 12 optical outputs making it simple to distribute VGA and stereo audio signals to multiple destinations.

The Fiberlink 7220 Series digitally transmits high-resolution RGB (up to WXGA) and stereo audio over one single mode or multimode fiber optic core at 1310 nm wavelength. Ideal for point-to-point, point-to-multipoint and drop-and-repeat applications, it supports VGA, SVGA, XGA and WXGA (640 x 480 up to 1366 x 768 ) and HDTV resolutions of 480p, 720p, and 1080i (RGBHV format only).

RGB with Stereo Audio Optical Receiver with 1 Baseband Output and 1 Optical Output

Fiberlink® 7225 RGB & Stereo Audio Series

The Fiberlink 7225 is a receiver for use with any of the 7220 Series transmitters. It offers 1 baseband output along with 2 channels of stereo audio and features an optical loop-thru so that your transmission can continue to another 7220 Series receiver.

1x8 RGB with Stereo Audio Optical Distributor

Fiberlink® 7224 RGB & Stereo Audio Series

The Fiberlink 7224 transmitter offers 8 optical outputs making it simple to distribute VGA and stereo audio signals to multiple destinations.

The Fiberlink 7220 Series digitally transmits high-resolution RGB (up to WXGA) and stereo audio over one single mode or multimode fiber optic core at 1310 nm wavelength. Ideal for point-to-point, point-to-multipoint and drop-and-repeat applications, it supports VGA, SVGA, XGA and WXGA (640 x 480 up to 1366 x 768 ) and HDTV resolutions of 480p, 720p, and 1080i (RGBHV format only).

RGB with Stereo Audio Optical Receiver with 4 Baseband Outputs

Fiberlink® 7223 RGB & Stereo Audio Series

The Fiberlink 7223 is a receiver for use with any of the 7220 Series transmitters. It offers 4 baseband outputs along with 8 channels of stereo audio.

The Fiberlink 7220 Series digitally transmitshigh-resolution RGB (up to WXGA) and stereo audio over one single modeor multimode fiber optic core at 1310 nm wavelength. Ideal forpoint-to-point, point-to-multipoint and drop-and-repeat applications,it supports VGA, SVGA, XGA and WXGA (640 x 480 up to 1366 x 768 ) andHDTV resolutions of 480p, 720p, and 1080i (RGBHV format only).

1x4 RGB with Stereo Audio Optical Distributor

Fiberlink® 7222 RGB & Stereo Audio Series

The Fiberlink 7222 transmitter offers 4 optical outputs making it simple to distribute VGA and stereo audio signals to multiple destinations. 

The Fiberlink 7220 Series digitally transmits high-resolution RGB (up to WXGA) and stereo audio over one single mode or multimode fiber optic core at 1310 nm wavelength. Ideal for point-to-point, point-to-multipoint and drop-and-repeat applications, it supports VGA, SVGA, XGA and WXGA (640 x 480 up to 1366 x 768 ) andHDTV resolutions of 480p, 720p, and 1080i (RGBHV format only).

RGB with Stereo Audio over one Fiber

Fiberlink® 7220 RGB & Stereo Audio Series

Limited time only: add RS-Type Data and Ethernet for no extra charge! Call today or contact us now to learn more!

The Fiberlink 7220 Series digitally transmits high-resolution RGB (up to WXGA) and stereo audio over one single mode or multimode fiber optic core at 1310 nm wavelength. Ideal for point-to-point, point-to-multipoint and drop-and-repeat applications, it supports VGA, SVGA, XGA and WXGA (640 x 480 up to 1366 x 768 ) and HDTV resolutions of 480p, 720p, and 1080i (RGBHV format only).

DVI & RGB Computer Video to 3G/HD/SD-SDI Scan Converter

Scan Do® 1298 HD

The all-new Scan Do HD Scan Converter converts Digital DVI and Analog RGB, atresolutions up to 1920 x 1080, to 3G/HD/SD-SDI output, providing broadcast-quality video images. It supports all SMPTE 3G-SDI output resolutions up to 1080p per SMPTE 424M-2006, HD-SDI outputresolutions up to 1080i per SMPTE 292 and SD-SDI resolutions (NTSC and PAL) per SMPTE 259, making it themost versatile model in the Scan Do family.

DVI & RGB Computer Video to SD-SDI Scan Converter

Scan Do® 1295 SD

The all-new Scan Do SD Scan Converter converts Digital DVI and Analog RGB, at resolutions up to 1920 x 1080, to SD-SDI output, providing broadcast-quality video images. It supports SD-SDI resolutions (NTSC and PAL) per SMPTE 259.

Advanced scaling algorithms and 10bit processing provide exceptionally clean and accurate broadcastquality output.

Line Doubler/Quadrupler Video Scaler

Deuce® 2240 SDQ

The Deuce SDQ versatile scaler, line doubler and line quadrupler offers quality performance at a very affordable price. It is ideal for Presentation, Education and Museum applications.

1080p HD Video Scaler

Deuce® 2230 HD

The Deuce HD provides video scaling and processing from standard TV video to five non-interlaced HDTV and DTV resolutions. It is ideal for Presentation, Home Theater and Broadcast applications.

Line Doubler/Quadrupler Video Scaler

Deuce® 2220 MC

The Deuce MC Video scaler, line doubler and line quadrupler with user-controlled, six-setting motion compensation feature is ideal for Presentation, Education, Museums and Control Room applications.

RGB, Stereo Audio, One Way Data over Fiber

Fiberlink® 7242 RGB, Audio and One Way Data Series

The Fiberlink 7242 Series digitally transmits RGBHV, stereo audio, one way RS-Type data over one single mode or multimode fiber.

Support for VGA, SVGA, XGA and WXGA (640 x 480 up to 1366 x 768 ) and HDTV resolutions of 480p, 720p, and 1080i (RGBHV format only) make the 7240 Series the choice of A/V professionals who need uncompromised data support.

RGB, Stereo Audio, Ethernet and Two Way Data over Fiber

Fiberlink® 7240 RGB, Audio and Data Series

The Fiberlink 7240 Series digitally transmits RGBHV, stereo audio, bidirectional 10Base-T and bidirectional data over one single mode or multimode fiber.

Support for VGA, SVGA, XGA and WXGA (640 x 480 up to 1366 x 768 ) and HDTV resolutions of 480p, 720p, and 1080i (RGBHV format only) make the 7240 Series the choice of A/V professionals who need uncompromised data support.

Dual Output DVI and Stereo Audio over Fiber

Fiberlink® 7512 DVI and Audio Series

The Fiberlink 7512 Series of optical DVI extenders is capable of driving two Fiberlink 7511 receivers in a point-to-multipoint configuration over multimode fiber. The unique dual optical outputs of the 7512 allow you to deliver your DVI source to two separate locations.

DVI and Stereo Audio over one Fiber

Fiberlink® 7510 DVI and Audio Series

The Fiberlink 7510 Series supports DVI transmission (up to 1920x1200) and stereo audio over one single mode or multimode fiber without compression, scaling or adjustments. It is ideal for Digital signage, broadcast or corporate studio, auditorium, stadium and theater, airport or transportation hub, distance learning, and surgical or medical imaging applications, to name a few!

Convert Optical 3G/HD/SD-SDI to DVI

Fiberlink® 3355 3G/HD/SD-SDI to DVI Series

The Fiberlink 3355 Series receives SMPTE standard 3G, HD or SD-SDI signals transmitted from the Fiberlink 3350, Fiberlink 3360, or Fiberlink 3380 Series transmitters, with or without embedded audio, and converts the baseband output to DVI. The Fiberlink 3355 receiver provides an independent audio output providing you with the ability to separate your audio and video signals.

Convert Optical 3G/HD/SD-SDI to HDMI

Fiberlink® 3353 3G/HD/SD-SDI to HDMI Series

The Fiberlink 3353 Series receives SMPTE standard 3G, HD or SD-SDI signals transmitted from the Fiberlink 3350, Fiberlink 3360, or Fiberlink 3380 Series transmitters, with or without embedded audio, and converts the baseband output to HDMI. The Fiberlink® 3353 receiver provides an independent audio output providing you with the ability to separate your audio and video signals. The audio is also embedded into the HDMI cable.

3G/HD/SD-SDI to HDMI Converter

Copperlink™ 2353 Copper 3G/HD/SD-SDI to HDMI Series

The Copperlink 2353 accepts a SMPTE compliant 3G/HD/SD-SDI input via coax, automatically detects and selects the output resolution with no scaling and converts it to HDMI. If audio is present in the SDI data stream, the operator can choose one of up to 4 pairs of stereo audio to embed into the HDMI baseband signal as well as output on the convenient audio RCA connections.

Bidirectional Video, Audio, Data and Contact Closure over Fiber

Fiberlink® Flex Video, Audio & Data Series

The Fiberlink Flex System employs pure digital processing and transmission to transmit any combination of video, audio, data and contact closure signals, in one or both directions, over one or two multimode or single mode fiber at 850, 1310 or 1550 nm. It is ideal for Broadcast, Cable, Satellite and Industrial Security applications.

HD/SD Component, S-Video, Composite Video over Fiber

Fiberlink® 7820 HD/SD Component, S-Video, Composite Video Series

The all-digital Fiberlink 7820 series has three modes of operation allowing the user to transmit high-quality HD/SD Component Video along with stereo audio, or S-Video and Composite Video along with stereo audio, or three channels of Composite Video along with stereo audio, all over a single fiber.

4 Video Channels and 8 Audio Channels over Fiber

Fiberlink® 7140 Video & Audio Series

The Fiberlink 7140 Series digitally transmits four uncompressed video channels and eight independent audio channels over one multimode or single mode fiber at 850, 1310 or 1550 nm. Video channel is compatible with NTSC, PAL or SECAM video standards.

15 MHz Wideband Video with 4 Audio Channels over one Fiber

Fiberlink® 7130 Wideband Video & Audio Series

The Fiberlink 7130 Series digitally transmits 15 MHz Wideband Video with four independent audio channels over one multimode or single mode fiber at 850, 1310 or 1550 nm using 10-bit video sampling. The video channel is compatible with NTSC, PAL or SECAM video standards. Audio channels may be configured independently by the user to have either balanced or unbalanced inputs and outputs.

Composite Video & Stereo Audio over Fiber

Fiberlink® 3620A Composite Video & Audio Series

The Fiberlink 3620A Series transmits composite video and two independent audio channels over one multimode or single mode fiber. It is ideal for Videoconferencing, Broadcast and Cable TV and Digital Signage applications.

Bidirectional Video, Audio, Data and Contact Closure over Fiber

Fiberlink® Flex Video, Audio & Data Series

The Fiberlink Flex System employs pure digital processing and transmission to transmit any combination of video, audio, data and contact closure signals, in one or both directions, over one or two multimode or single mode fiber at 850, 1310 or 1550 nm. It is ideal for Broadcast, Cable, Satellite and Industrial Security applications.

3G/HD/SD-SDI & 4 Channels of Analog Audio over Fiber

Fiberlink® 3380 3G/HD/SD-SDI & Analog Audio Series

The Fiberlink 3380 Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259 with the ability to embed up to 4 channels (2 pairs) of analog line level audio. Convenient switches on the 3380 Series transmitter allow the operator to embed each of the two pairs of audio independently, to strip previously serialized audio, or to pass it through without modification. At the receive end of the fiber optic link, the operator can decide which audio pairs they need de-embedded.

3G/HD/SD-SDI & 4 Pairs AES/EBU Audio over Fiber

Fiberlink® 3360 3G/HD/SD-SDI & AES/EBU Audio Series

The Fiberlink 3360 Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259 with the ability to embed up to 8 channels (4 pairs) of AES/EBU digital audio. Convenient switches on the 3360 Series transmitter allow the operator to embed each of the four pairs of audio independently, to strip previously serialized audio, or to pass it through without modification. At the receive end of the fiber optic link, the operator can decide which audio pairs they need de-embedded.

15Mhz Wideband Video over Fiber

Fiberlink® 7100 Wideband Video Series

The Fiberlink 7100 Series digitally transmits 15 MHz Wideband Video over one multimode or single mode fiber at 850, 1310 or 1550 nm using 10-bit video sampling. The video channel is compatible with NTSC, PAL or SECAM video standards. Pure digital processing and transmission make the 7100 Series ideal for Broadcast, Cable, Satellite and Industrial Security applications.

10 Channel Video Multiplexer over Fiber

Fiberlink® 3134 Video Multiplexer Series

The Fiberlink 3134 Series is a 10 Channel Video Multiplexer that transmits all-digital signals over one single mode or multimode fiber. Fiberlink 3134 is capable of multiplexing up to 10 individual composite video sources onto one optical fiber. Fiberlink 3134 is compatible with Fiberlink Matrix and is ideal for Security, Remote Monitoring, Command and Control Center applications.

Composite Video over Fiber

Fiberlink® 3105 Composite Video Series

The Beamer-V provides fiber optic transmission of composite video in a simple, low-cost system. It transmits up to three kilometers over multimode fiber at 850 nm at 8 MHz video bandwidth. Beamer-V is ideal for Security and A/V Confidence Monitoring applications.

3G/HD/SD-SDI over Fiber

Fiberlink® 3350 3G/HD/SD-SDI Series

The Fiberlink 3350 Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259, with or without embedded audio and data, as well as DVB-ASI over one single mode or multimode fiber. Signals are equalized and re-clocked prior to fiber optic transmission. The 3350 transmitter features a re-clocked and equalized SDI loop through and the 3351 receiver features two re-clocked and equalized SDI outputs.

10/100/1000 Ethernet over Fiber

Fiberlink® 5100 10/100/1000 Ethernet Series

The Fiberlink 5100 Series transmits 10/100/1000 Base-T Ethernet over one or two single mode or multimode fiber optic cables. The Fiberlink 5100 supports both full and half duplex modes and is ideal for IT, broadcast and pro a/v architectures.

Two-Way RS-Type Data over Fiber

Fiberlink® 5018A Universal Data Transceivers

The Fiberlink 5018 Universal Data Transceiver digitally transmits RS-232/422/485 data over multimode or single mode fiber at 850 or 1310 nm. It transmits and receives all standard data-related signals in accordance with EIA specifications. The 5012 is suitable for simplex, full duplex and drop-and-repeat operation, making it ideal for Data Acquisition, Intelligent Transportation, Industrial and Manufacturing applications.

Two-Way RS-Type Data over Fiber

Fiberlink® 5012 Universal Data Transceivers

The Fiberlink 5012 Universal Data Transceiver digitally transmits RS-232/422/485 data over multimode or single mode fiber at 850 or 1310 nm. It transmits and receives all standard data-related signals in accordance with EIA specifications. The 5012 is suitable for simplex, full duplex and drop-and-repeat operation, making it ideal for Data Acquisition, Intelligent Transportation, Industrial and Manufacturing applications.

Fiber Optic RS-232 Micro Transceiver

Fiberlink® 5002 RS-232 Data Series

The Fiberlink 5002 transmits RS-232 data over standard multimode fiber at 850 nm for simplex, duplex, asynchronous, point-to-point and drop-and-repeat operation. The micro transceiver occupies no more space than a DB-25 connector and supports distances up to 3.2 km. It is ideal for Remote control, Telemetry and Digital signage applications.

32x32 Fiber Optic Matrix/Signal Router

Fiberlink® OM32 Matrix

Fiberlink Matrix is a fully configurable and SMPTE compliant 32x32 optical router. The inputs and outputs can be ordered in quantities of one and the input and output quantities do not have to match providing you with the ability to build a Matrix that is ideal for your specific application and budget!

16x16 Fiber Optic Matrix/Signal Router

Fiberlink® OM16 Matrix

Fiberlink Matrix is a fully configurable and SMPTE compliant 16x16 optical router. The inputs and outputs can be ordered in quantities of one and the input and output quantities do not have to match providing you with the ability to build a Matrix that is ideal for your specific application and budget!

1x4 3G/HD/SD-SDI Optical/Copper Hybrid Optical Distribution Amplifier

Fiberlink® 8204 3G/HD/SD-SDI Optical Distribution Series

The Fiberlink 8200 Series of optical distribution amplifiers accept a 3G/HD/SD-SDI or DVB-ASI signal via BNC or its optical input and outputs it on four independently driven optical fibers. A convenient front panel switch allows the operator to toggle between the copper and the optical input sources.

1x3 3G/HD/SD-SDI Optical/Copper Hybrid Optical Distribution Amplifier

Fiberlink® 8203 3G/HD/SD-SDI Optical Distribution Series

The Fiberlink 8200 Series of optical distribution amplifiers accept a 3G/HD/SD-SDI or DVB-ASI signal via BNC or its optical input and outputs it on three independently driven optical fibers. A convenient front panel switch allows the operator to toggle between the copper and the optical input sources.

1x2 3G/HD/SD-SDI Optical/Copper Hybrid Optical Distribution Amplifier

Fiberlink® 8202 3G/HD/SD-SDI Optical Distribution Series

The Fiberlink 8200 Series of optical distribution amplifiers accept a 3G/HD/SD-SDI or DVB-ASI signal via BNC or its optical input and outputs it on two independently driven optical fiber. A convenient front panel switch allows the operator to toggle between the copper and the optical input sources.

1x1 3G/HD/SD-SDI Optical/Copper Hybrid Optical Distribution Amplifier

Fiberlink® 8201 3G/HD/SD-SDI Optical Distribution Series

The Fiberlink 8200 Series of optical distribution amplifiers accept a 3G/HD/SD-SDI or DVB-ASI signal via BNC or its optical input and outputs it on one independently driven optical fiber. A convenient front panel switch allows the operator to toggle between the copper and the optical input sources.

1x12 Optical Distribution Amplifier

Fiberlink® 8112 Optical Distribution Series

Model 8102 is a 1x2 fiber optic distribution amplifier compatible with single mode and multimode fiber.

The Fiberlink 8100 Series distribution amplifier (D.A.) may be configured to transmit up to twelve outputs of any type of signal(s) supported by the Fiberlink line of products. Its ability to provide point-to-multipoint signal distribution over fiber in virtually unlimited configurations and over unlimited distances makes it unique within the Pro AV mark

1x10 Optical Distribution Amplifier

Fiberlink® 8110 Optical Distribution Series

Model 8102 is a 1x2 fiber optic distribution amplifier compatible with single mode and multimode fiber.

The Fiberlink 8100 Series distribution amplifier (D.A.) may be configured to transmit up to twelve outputs of any type of signal(s) supported by the Fiberlink line of products. Its ability to provide point-to-multipoint signal distribution over fiber in virtually unlimited configurations and over unlimited distances makes it unique within the Pro AV mark

1x8 Optical Distribution Amplifier

Fiberlink® 8108 Optical Distribution Series

Model 8102 is a 1x2 fiber optic distribution amplifier compatible with single mode and multimode fiber.

The Fiberlink 8100 Series distribution amplifier (D.A.) may be configured to transmit up to twelve outputs of any type of signal(s) supported by the Fiberlink line of products. Its ability to provide point-to-multipoint signal distribution over fiber in virtually unlimited configurations and over unlimited distances makes it unique within the Pro AV mark

1x6 Optical Distribution Amplifier

Fiberlink® 8106 Optical Distribution Series

Model 8102 is a 1x2 fiber optic distribution amplifier compatible with single mode and multimode fiber.

The Fiberlink 8100 Series distribution amplifier (D.A.) may be configured to transmit up to twelve outputs of any type of signal(s) supported by the Fiberlink line of products. Its ability to provide point-to-multipoint signal distribution over fiber in virtually unlimited configurations and over unlimited distances makes it unique within the Pro AV mark

1x4 Optical Distribution Amplifier

Fiberlink® 8104 Optical Distribution Series

Model 8102 is a 1x2 fiber optic distribution amplifier compatible with single mode and multimode fiber.

The Fiberlink 8100 Series distribution amplifier (D.A.) may be configured to transmit up to twelve outputs of any type of signal(s) supported by the Fiberlink line of products. Its ability to provide point-to-multipoint signal distribution over fiber in virtually unlimited configurations and over unlimited distances makes it unique within the Pro AV mark

1x2 Optical Distribution Amplifier

Fiberlink® 8102 Optical Distribution Series

Model 8102 is a 1x2 fiber optic distribution amplifier compatible with single mode and multimode fiber.

The Fiberlink 8100 Series distribution amplifier (D.A.) may be configured to transmit up to twelve outputs of any type of signal(s) supported by the Fiberlink line of products. Its ability to provide point-to-multipoint signal distribution over fiber in virtually unlimited configurations and over unlimited distances makes it unique within the Pro AV mark

1x4 Optical Distribution Amplifier

Fiberlink® 8004 Optical Distribution Series

The Fiberlink 8004 is a 1x4 Optical Distribution Amplifier compatible with single mode and multimode fiber.

The Fiberlink 8000 Series optical distribution amplifier (ODA) may be configured to transmit from one to four outputs of any type of signal(s) supported by the Fiberlink line of products. Its ability to provide point-to-multipoint signal distribution over fiber in virtually unlimited configurations and over unlimited distancesmakes it unique within the Broadcast market.

1x3 Optical Distribution Amplifier

Fiberlink® 8003 Optical Distribution Series

The Fiberlink 8003 is a 1x3 Optical Distribution Amplifier compatible with single mode and multimode fiber.

The Fiberlink 8000 Series optical distribution amplifier (ODA) may be configured to transmit from one to four outputs of any type of signal(s) supported by the Fiberlink line of products. Its ability to provide point-to-multipoint signal distribution over fiber in virtually unlimited configurations and over unlimited distancesmakes it unique within the Broadcast market.

1x2 Optical Distribution Amplifier

Fiberlink® 8002 Optical Distribution Series

The Fiberlink 8002 is a 1x2 Optical Distribution Amplifier compatible with single mode and multimode fiber.

The Fiberlink 8000 Series optical distribution amplifier (ODA) may be configured to transmit from one to four outputs of any type of signal(s) supported by the Fiberlink line of products. Its ability to provide point-to-multipoint signal distribution over fiber in virtually unlimited configurations and over unlimited distancesmakes it unique within the Broadcast market.

1x1 Optical Distribution Amplifier

Fiberlink® 8001 Optical Distribution Series

The Fiberlink 8001 is a 1x1 Optical Distribution Amplifier compatible with single mode and multimode fiber.

The Fiberlink 8000 Series optical distribution amplifier (ODA) may be configured to transmit from one to four outputs of any type of signal(s) supported by the Fiberlink line of products. Its ability to provide point-to-multipoint signal distribution over fiber in virtually unlimited configurations and over unlimited distancesmakes it unique within the Broadcast market.

32x32 Fiber Optic Matrix/Signal Router

Fiberlink® OM32 Matrix

Fiberlink Matrix is a fully configurable and SMPTE compliant 32x32 optical router. The inputs and outputs can be ordered in quantities of one and the input and output quantities do not have to match providing you with the ability to build a Matrix that is ideal for your specific application and budget!

16x16 Fiber Optic Matrix/Signal Router

Fiberlink® OM16 Matrix

Fiberlink Matrix is a fully configurable and SMPTE compliant 16x16 optical router. The inputs and outputs can be ordered in quantities of one and the input and output quantities do not have to match providing you with the ability to build a Matrix that is ideal for your specific application and budget!

1x4 Single Mode Fiber Optic Signal Splitter

Fiberlink® 6524 Optical Splitter Series

The Fiberlink 6500 Series passive optical splitters allow transmission from a one way fiber optic transmitter to drive multiple receiver units simultaneously by “splitting” optical power across outputs. It is compatible with all Fiberlink one way systems.

1x2 Single Mode Fiber Optic Signal Splitter

Fiberlink® 6522 Optical Splitter Series

The Fiberlink 6500 Series passive optical splitters allow transmission from a one way fiber optic transmitter to drive multiple receiver units simultaneously by “splitting” optical power across outputs. It is compatible with all Fiberlink one way systems.

1x4 Multimode Fiber Optic Signal Splitter

Fiberlink® 6514 Optical Splitter Series

The Fiberlink 6500 Series passive optical splitters allow transmission from a one way fiber optic transmitter to drive multiple receiver units simultaneously by “splitting” optical power across outputs. It is compatible with all Fiberlink one way systems.

1x2 Multimode Fiber Optic Signal Splitter

Fiberlink® 6512 Optical Splitter Series

The Fiberlink 6500 Series passive optical splitters allow transmission from a one way fiber optic transmitter to drive multiple receiver units simultaneously by “splitting” optical power across outputs. It is compatible with all Fiberlink one way systems.

FlexPOD Flexible Passive Optical Distribution System

Fiberlink® FlexPOD

Fiberlink FlexPOD is a configurable passive optical signal distribution system to create up to 4 different and independent optical coarse wave division multiplexers (CWDM), wave division multiplers (WDM) and/or Splitters in 1RU!

FlexPOD Flexible Passive Optical Distribution System

Fiberlink® FlexPOD

Fiberlink FlexPOD is a configurable passive optical signal distribution system to create up to 4 different and independent optical coarse wave division multiplexers (CWDM), wave division multiplers (WDM) and/or Splitters in 1RU!

8 Channel Coarse Wave Division Multiplexer

Fiberlink® 6408 CWDM Series

Coarse wave division multiplexers (CWDM) allow 8 fiber optic links to operate at different wavelengths over a single fiber. The 6400 Series is ideal for virtually every fiber optic application to reduce fiber usage, consolidate signals where fiber capacity is limited and maximize the bandwidth of single mode fiber.

4 Channel Coarse Wave Division Multiplexer

Fiberlink® 6404 CWDM Series

Coarse wave division multiplexers (CWDM) allow 4 fiber optic links to operate at different wavelengths over a single fiber. The 6400 Series is ideal for virtually every fiber optic application to reduce fiber usage, consolidate signals where fiber capacity is limited and maximize the bandwidth of single mode fiber.

2 Channel Wave Division Multiplexer for Single Mode Fiber

Fiberlink® 6420 Wave Division Multiplexer Series

The Fiberlink 6400 Series passive wave division multiplexers (WDMs) combine two optical signals at different wavelengths onto a single fiber. The systems may be used to transmit two separate optical signals in the same direction or in opposite directions and work with all Fiberlink and Fiberlink one way systems.

2 Channel Wave Division Multiplexer for Multimode Fiber

Fiberlink® 6410 Wave Division Multiplexer Series

The Fiberlink 6400 Series passive wave division multiplexers (WDMs) combine two optical signals at different wavelengths onto a single fiber. The systems may be used to transmit two separate optical signals in the same direction or in opposite directions and work with all Fiberlink and Fiberlink one way systems.

FlexPOD Flexible Passive Optical Distribution System

Fiberlink® FlexPOD

Fiberlink FlexPOD is a configurable passive optical signal distribution system to create up to 4 different and independent optical coarse wave division multiplexers (CWDM), wave division multiplers (WDM) and/or Splitters in 1RU!

3G/HD/SD-SDI & 4 Pairs AES/EBU Audio over Fiber

Fiberlink® 3360 3G/HD/SD-SDI & AES/EBU Audio Series

The Fiberlink 3360 Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259 with the ability to embed up to 8 channels (4 pairs) of AES/EBU digital audio. Convenient switches on the 3360 Series transmitter allow the operator to embed each of the four pairs of audio independently, to strip previously serialized audio, or to pass it through without modification. At the receive end of the fiber optic link, the operator can decide which audio pairs they need de-embedded.

32 Channels of Stereo Audio over one Fiber

Fiberlink® 4320 Analog Audio Series

The Fiberlink 4320 Series digitally transmits thirty-two independent audio channels over one multimode or single mode fiber at 850, 1310 or 1550 nm, with optional redundancy. It is ideal for Rental, Staging, Theater, Stadiums, Theme Parks and Broadcast applications.

16 Channels of Stereo Audio over one Fiber

Fiberlink® 4160 Analog Audio Series

The Fiberlink 4160 Series digitally transmits sixteen independent audio channels over one multimode or single mode fiber at 850, 1310 or 1550 nm, with optional redundancy. It is ideal for Rental, Staging, Theater, Stadiums, Theme Parks and Broadcast applications.

4 Channels of Stereo Audio over one Fiber

Fiberlink® 4040 Analog Audio Series

The Fiberlink 4040 Series digitally transmits four independent audio channels over one multimode or single mode fiber at 850, 1310 or 1550 nm. It is ideal for Rental, Staging, Education and Broadcast applications.

3G/HD/SD-SDI & 4 Channels of Analog Audio over Fiber

Fiberlink® 3380 3G/HD/SD-SDI & Analog Audio Series

The Fiberlink 3380 Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259 with the ability to embed up to 4 channels (2 pairs) of analog line level audio. Convenient switches on the 3380 Series transmitter allow the operator to embed each of the two pairs of audio independently, to strip previously serialized audio, or to pass it through without modification. At the receive end of the fiber optic link, the operator can decide which audio pairs they need de-embedded.

Composite Video & Bidirectional Data over Fiber

Fiberlink® 3820 Composite Video & Data Series

The Fiberlink 3800 Series transmits Composite Video and Bidirectional Data over multimode or single mode fiber at 850, 1310 or1550 nm using one or two fibers. The 3800 Series is ideal for Security and Casino applications.

Composite Video with Two-Way Data over Fiber

Fiberlink® 3810 Composite Video & Data Series

The Fiberlink 3800 Series transmits Composite Video and Bidirectional Data over multimode or single mode fiber at 850, 1310 or1550 nm using one or two fibers. The 3800 Series is ideal for Security and Casino applications.

10 Channel Video Multiplexer with Two-Way Data over one Fiber

Fiberlink® 3334 Video Multiplexer with Data Series

The Fiberlink 3334 Series is a 10 Channel Video Multiplexer that transmits all-digital signals over one single mode or multimode fiber. Fiberlink 3334 is capable of multiplexing up to 10 individual composite video sources onto one optical fiber along with bi-directional RS-Type data. Fiberlink 3334 is ideal for Security, Remote Monitoring, Command and Control Center applications.

Bidirectional Video, Audio, Data and Contact Closure over Fiber

Fiberlink® Flex Video, Audio & Data Series

The Fiberlink Flex System employs pure digital processing and transmission to transmit any combination of video, audio, data and contact closure signals, in one or both directions, over one or two multimode or single mode fiber at 850, 1310 or 1550 nm. It is ideal for Broadcast, Cable, Satellite and Industrial Security applications.

3G/HD/SD-SDI, Ethernet & 2 Channels RS-Type Data over Two Fibers

Fiberlink® 3372 3G/HD/SD-SDI & Data Series

The Fiberlink 3372 Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259 with the ability to transmit 10/100 Base-T Ethernet and two channels of RS-Type data over two multimode fibers. All data channels are available simultaneously and convenient switches on the 3370 Series transmitter allow the operator to configure each of the two pairs of data independently.

3G/HD/SD-SDI, Ethernet & 2 Channels RS-Type Data over Fiber

Fiberlink® 3370 3G/HD/SD-SDI & Data Series

The Fiberlink 3370 Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259 with the ability to transmit 10/100 Base-T Ethernet and two channels of RS-Type data over one single mode fiber. All data channels are available simultaneously and convenient switches on the 3370 Series transmitter allow the operator to configure each of the two pairs of data independently.

Fiber Optical Power Meter Kit

Fiberlink® 6625 Optical Power Meter Kit

The Fiberlink Optical Power Meter Kit is an indispensable tool for installing and maintaining fiber optic links. It includes everything needed for convenient, on-site testing of fiberoptic cables and simplifies assessing loss budgets.

Three Wavelength Light Source

Fiberlink® 6620 Three Wavelength Light Source

The Fiberlink Three Wavelength Light Source offers a laser output at wavelengths of 1310 and 1550 nm and VCSEL output at 850 nm, allowing for convenient, on-site testing of fiber networks during construction and maintenance procedures.

Optical Power Meter

Fiberlink® 6615 Optical Power Meter

The Fiberlink Optical Power Meter measures the power of optical signals at 850, 980, 1310 and 1550 nm wavelengths, allowing for convenient, on-site testing of fiber networks during construction and maintenance procedures. It can be used to measure the power of an optical signal reaching the receiving end of a fiber optic cable, as generated either by a transmitter unit or by a light source such as the 6620.

Visible Light Source

Fiberlink® 6610 Visible Light Source

The Fiberlink Visible Light Source provides a visible 650 nm laser output that can be used for identifying fiber breaks and individual fibers within fiber bundles, allowing for convenient, on-site testing of fiber networks during construction and maintenance procedures.

Fiber Optic Termination Kit

Fiberlink® 6202 Fiber Optic Termination Kit

The Fiberlink 6202 Fiber Optic Termination Kit provides consistently reliable high-performance terminations of ST and FCPC connectors on both multimode and single mode fibers. 

Easy and fool-proof terminations can be completed in minutes, even without previous experience terminating fiber! The lightweight and portable kit includes all the tools and adapters necessary and is ideal for both field and shop use.

CALTRANS 170/179 and NEMA over Fiber

Fiberlink® XRD-8050 CALTRANS 170/179 and NEMA Series

The XRD-8050 supports fiber optic data transmission for CALTRANS 170 or 179 series and NEMA traffic signal controller applications. It is ideal for Intelligent Transportation and Traffic and Control applications.

8 Contact Closure or TTL Signals over one Fiber

Fiberlink® XC-1000A Contact Closure/TTL Series

The Fiberlink XC/RC-1000A transmits eight independent contact closure or TTL signals over a single fiber and is ideal for Security Centers,Casinos, Power Plants and Industrial Facilities. The eight independentchannels may be used in any combination.

IRIG/NASA/NBS Time Code formats over Fiber

Fiberlink® XA-1900A IRIG/NASA/NBS Time Code Series

The Fiberlink XA/RA-1900A and XR-1900 fiber optic systems transmit IRIG and similar NASA and NBS standard instrumentation time-code formats over standard multimode or single mode fiber at 850 nm or 1310 nm.Combinations of four different units may be configured to providepoint-to-point, point-to-multipoint or drop-and-repeat signaldistribution. Ideal for the Military and Aerospace Industries.

8 Contact Closure or TTL Signals over one Fiber

Fiberlink® RC-1000A Contact Closure/TTL Series

The Fiberlink XC/RC-1000A transmits eight independent contact closure or TTL signals over a single fiber and is ideal for Security Centers, Casinos, Power Plants and Industrial Facilities. The eight independent channels may be used in any combinatio

IRIG/NASA/NBS Time Code formats over Fiber

Fiberlink® RA-1900A IRIG/NASA/NBS Time Code Series

The Fiberlink XA/RA-1900A and XR-1900 fiber optic systems transmit IRIG and similar NASA and NBS standard instrumentation time-code formats over standard multimode or single mode fiber at 850 nm or 1310 nm.Combinations of four different units may be configured to providepoint-to-point, point-to-multipoint or drop-and-repeat signaldistribution. Ideal for the Military and Aerospace Industries.

IRIG/NASA/NBS Time Code formats over 10 Fibers

Fiberlink® XA-1903 IRIG/NASA/NBS Time Code 10 Optical Output Series

The Fiberlink XA/RA-1900A and XR-1900 fiber optic systems transmit IRIG and similar NASA and NBS standard instrumentation time-code formats over standard multimode or single mode fiber at 850 nm or 1310 nm.Combinations of four different units may be configured to providepoint-to-point, point-to-multipoint or drop-and-repeat signaldistribution. Ideal for the Military and Aerospace Industries.

Bidirectional Video, Audio, Data and Contact Closure over Fiber

Fiberlink® Flex Video, Audio & Data Series

The Fiberlink Flex System employs pure digital processing and transmission to transmit any combination of video, audio, data and contact closure signals, in one or both directions, over one or two multimode or single mode fiber at 850, 1310 or 1550 nm. It is ideal for Broadcast, Cable, Satellite and Industrial Security applications.

IRIG/NASA/NBS Time Code formats over 10 Fibers

Fiberlink® XA-1903 IRIG/NASA/NBS Time Code 10 Optical Output Series

The Fiberlink XA/RA-1900A and XR-1900 fiber optic systems transmit IRIG and similar NASA and NBS standard instrumentation time-code formats over standard multimode or single mode fiber at 850 nm or 1310 nm.Combinations of four different units may be configured to providepoint-to-point, point-to-multipoint or drop-and-repeat signaldistribution. Ideal for the Military and Aerospace Industries.

IRIG/NASA/NBS Time Code formats over Fiber

Fiberlink® XA-1900A IRIG/NASA/NBS Time Code Series

The Fiberlink XA/RA-1900A and XR-1900 fiber optic systems transmit IRIG and similar NASA and NBS standard instrumentation time-code formats over standard multimode or single mode fiber at 850 nm or 1310 nm.Combinations of four different units may be configured to providepoint-to-point, point-to-multipoint or drop-and-repeat signaldistribution. Ideal for the Military and Aerospace Industries.

Adaptor Plate

Rackmounts AP-1000 Adaptor Plate

Adaptor plate for mounting the following units: XA/RA-1000A, XA/RA-1400A, XA/RA-1900. One plate is required for each unit.

Alarm Sensing Module for the 6000A Card Cage

Rackmounts 6020A Alarm Sensing Module

The Model 6020 Alarm Sensing Module is a single position plug-in card for use with the model 6000 card-cage. When installed, the Alarm Sensing Module senses a fault condition from any Fiberlink alarm-equipped transmission card/module plugged into the card-cage. When a fault occurs, a visual, audible and remote indication from the unit informs the user of the fault condition.

Rackmountable Card Cage for Fiberlink Card Products

Rackmounts 6000A Rackmountable Card Cage

The Fiberlink 6000A Rackmountable 19” card cage offers 20 positions for any combination of Fiberlink transmitter, receiver and transceiver card modules. (Please refer to the Fiberlink products' data sheet for slot and power requirements) 

Scan Do, Deuce and Splitter Rackmount Kits

Rackmounts 1240-1247 Kits

Communications Specialties manufactures a variety of single and double unit rackmount kits for the easy mounting of Scan Do Select, Scan Do Pro II, Scan Do Pro II/D, Deuce MC, Deuce HD, Deuce SDQ, TwinSplit, QuadSplit, HexiSplit, OctoSplit and DeciSplit products.

150 Watt Power Supply for Fiberlink Card Cage

Rackmounts 6012A Power Supply

The 6012A is a 150 watt power supply module for the 6000A Series of Fiberlink Rackmountable Card Cages.

85 Watt Power Supply for Fiberlink Card Cage

Rackmounts 6010A Power Supply

The 6010A is an 85 watt power supply module for the 6000A Series of Fiberlink Rackmountable Card Cages.

1x6 S-Video Distribution Amplifier

Splitters and Switches 1806 HexiSplit

The HexiSplit Splitter for S-Video fully-buffered six outputdistribution amplifier connects multiple S-Video monitors to a singleS-Video source. It supports S-Video signals in NTSC and PAL formats.The HexiSplit is ideal for Home Theatre, Presentation, Court Rooms andMedical applications.

1x2 S-Video Distribution Amplifier

Splitters and Switches 1802 TwinSplit

The TwinSplit Splitter for S-Video fully-buffered two output distribution amplifier connects multiple S-Video monitors to a single S-Video source. It supports S-Video signals in NTSC and PAL formats. The TwinSplit is ideal for Home Theatre, Presentation, Court Rooms and Medical applications.

1x6 Composite Video Distribution Amplifier

Splitters and Switches 1706 HexiSplit

The HexiSplit Splitter fully-buffered six output distribution amplifier connects multiple video monitors to a single composite video source. It supports composite video signals in NTSC and PAL formats. The HexiSplit is ideal for Professional Video, Remote Monitoring, Security, Education, Court Room and Control Room applications.

1x10 VGA Splitter

Splitters and Switches 1310 DeciSplit

The DeciSplit fully-buffered distribution amplifier offers ten outputs to connect multiple VGA monitors to a single VGA source. Supports all VGA, SVGA, XGA, SXGA and UXGA resolutions up to 1600 x 1280. It is ideal for Digital Signage, Remote Monitoring, Corporate, Manufacturing, Inspection, Education, Control Room and Court Room applications.

1x8 VGA Distribution Amplifier

Splitters and Switches 1308 OctoSplit

The OctoSplit fully-buffered distribution amplifier offers eight outputs to connect multiple VGA monitors to a single VGA source. Supports all VGA, SVGA, XGA, SXGA and UXGA resolutions up to 1600 x 1280. It is ideal for Digital Signage, Remote Monitoring, Corporate, Manufacturing, Inspection, Education, Control Room and Court Room applications.

1x6 VGA Distribution Amplifier

Splitters and Switches 1306 HexiSplit

The HexiSplit fully-buffered distribution amplifier offers six outputs to connect multiple VGA monitors to a single VGA source. Supports all VGA, SVGA, XGA, SXGA and UXGA resolutions up to 1600 x 1280. It is ideal for Digital Signage, Remote Monitoring, Corporate, Manufacturing, Inspection, Education, Control Room and Court Room applications.

1x4 VGA Distribution Amplifier

Splitters and Switches 1304 QuadSplit

The QuadSplit fully-buffered distribution amplifier offers four outputs to connect multiple VGA monitors to a single VGA source. Supports all VGA, SVGA, XGA, SXGA and UXGA resolutions up to 1600 x 1280. It is ideal for Digital Signage, Remote Monitoring, Corporate, Manufacturing, Inspection, Education, Control Room and Court Room applications.

1x2 VGA Distribution Amplifier

Splitters and Switches 1302 TwinSplit

The TwinSplit fully-buffered distribution amplifier offers two outputs to connect multiple VGA monitors to a single VGA source. Supports all VGA, SVGA, XGA, SXGA and UXGA resolutions up to 1600 x 1280. It is ideal for Digital Signage, Remote Monitoring, Corporate, Manufacturing, Inspection, Education, Control Room and Court Room applications.

1x4 RGB/YUV Distribution Amplifier

Splitters and Switches 1261 QuadSplit

The QuadSplit is a fully-buffered four output distribution amplifier for RGB and YUV signals. It connects multiple projectors, LCD panels, multi-sync monitors and any equipment with BNC connectors to a single RGB or YUV source and is ideal for Presentations, Education, Command and Control Centers, Simulation and Medical applications. Unit supports resolutions up to 1600 x 1280 and 300 MHz bandwidth. Operates at distances up to 250 feet.

1x2 RGB/YUV Distribution Amplifier

Splitters and Switches 1260 TwinSplit

The 1260 TwinSplit is a fully-buffered two output distribution amplifier for for RGB and YUV signals. It connects multiple projectors, LCD panels, multi-sync monitors and any equipment with BNC connectors to a single RGB or YUV source and is ideal for Presentations, Education, Command and Control Centers, Simulation and Medical applications. Unit supports resolutions up to 1600 x 1280 and 300 MHz bandwidth. Operates at distances up to 250 feet.

1x2 VGA Splitter & Distance Extender

Splitters and Switches 1067 TwinSplit

The TwinSplit E.D. (Extended Distance) VGA splitter distributes computer video from a single PC to two monitors located at remote distances. Maximum distance supported varies by computer resolution: 640 x 480: 700 feet maximum, 800 x 600: 600 feet maximum, 1024 x 768: 500 feet maximum.

4x1 VGA Switch

Splitters and Switches 1340 QuadSwitch

The Quadswitch for VGA is a high-performance 4x1 active switch with fully buffered inputs and output and advanced sync processing. It can drive any type of monitor, flat panel, projector or display that is VGA compatible and is ideal for Presentation, Education, Contol Room and Court Room applications.

Dual Conductor, 8/10u Single Mode Fiber Terminated with FCPC Connectors

Cables 6226 Single Mode Series

Dual Conductor, 8/10u Single Mode Fiber Terminated with FCPC Connectors

Single Conductor, 8/10u Single Mode Fiber Terminated with FCPC Connectors

Cables 6225 Single Mode Series

Single Conductor, 8/10u Single Mode Fiber Terminated with FCPC Connectors

Plenum Rated, Dual Conductor, 8/10u Single Mode Fiber Optic Cable

Cables 6132 Single Mode Series

Plenum Rated, Dual Conductor, 8/10u Single Mode Fiber Optic Cable

Plenum Rated, Single Conductor, 8/10u Single Mode Fiber Optic Cable

Cables 6131 Single Mode Series

Plenum Rated, Single Conductor, 8/10u Single Mode Fiber Optic Cable

Dual Conductor, 8/10u Single Mode Fiber Optic Cable

Cables 6122 Single Mode Series

Dual Conductor, 8/10u Single Mode Fiber Optic Cable

Single Conductor, 8/10u Single Mode Fiber Optic Cable

Cables 6121 Single Mode Series

Single Conductor, 8/10u Single Mode Fiber Optic Cable

Dual Conductor, 62.5u Multimode Fiber Optic Cable Terminated with ST Connectors

Cables 6216 Multimode Series

Dual Conductor, 62.5u Multimode Fiber Optic Cable Terminated with ST Connectors

Single Conductor, 62.5u Multimode Fiber Optic Cable Terminated with ST Connectors

Cables 6215 Multimode Series

Single Conductor, 62.5u Multimode Fiber Optic Cable Terminated with ST Connectors

Plenum Rated, Dual Conductor, 62.5u Multimode Fiber Optic Cable

Cables 6112 Multimode Series

Plenum Rated, Dual Conductor, 62.5u Multimode Fiber Optic Cable

Plenum Rated, Single Conductor, 62.5u Multimode Fiber Optic Cable

Cables 6111 Multimode Series

Plenum Rated, Single Conductor, 62.5u Multimode Fiber Optic Cable

Dual Conductor, 62.5u Multimode Fiber Optic Cable

Cables 6102 Multimode Series

Dual Conductor, 62.5u Multimode Fiber Optic Cable

Single Conductor, 62.5u Multimode Fiber Optic Cable

Cables 6101 Multimode Series

Single Conductor, 62.5u Multimode Fiber Optic Cable

S-Video Female to Female Gender Changer

Cables 1178 CAB-30

S-Video F/F gender changer for connecting two cables together. For Use With: TwinSplit for S-Video, HexiSplit for S-Video.

VGA HD-15 M/M Gender Changer

Cables 1176 CAB-19

HD-15 M/M gender changer for connecting two cables together. For Use With: TwinSplit for VGA, OctoSplit for VGA, QuadSplit for VGA, DeciSplit for VGA, HexiSplit for VGA, QuadSwitch for VGA.

BNC F/F adaptor "bullet" for connecting two cables together

Cables 1173 CAB-59

BNC F/F adaptor "bullet" for connecting two cables together

TERM-5, 2 x BNC-M preattcheed to cable

Cables 1169 CAB-59

TERM-5, 2 x BNC-M preattcheed to cable. For Use With: HexiSplit for Video.

TERM-6, 10 x BNC-M, pre-attached to cable.

Cables 1167 CAB-43

TERM-6, 10 x BNC-M, pre-attached to cable. For Use With: TwinSplit for RGB, QuadSplit for RGB.

TERM-8, 8 x BNC-M, preattached to cable.

Cables 1166 CAB-43

TERM-8, 8 x BNC-M, preattached to cable. For Use With: TwinSplit for RGB, QuadSplit for RGB.

2x4-Pin Mini-DIN Male

Cables 1164 CAB-30

TERM-9; 2x4-pin mini-DIN-M preattached to cable. For Use With: TwinSplit for S-Video, HexiSplit for S-Video.

50-ft Extension Cable with 2 BNC's

Cables 1159-050 CAB-59

50-ft extension cable w/2 x BNC-M termination. For Use With: HexiSplit for Video.

25-ft Extension Cable with 2 BNC's

Cables 1159-025 CAB-59

25-ft extension cable w/2 x BNC-M termination. For Use With: HexiSplit for Video.

12-ft Extension Cable with 2 BNC's

Cables 1159-012 CAB-59

12-ft extension cable w/2 x BNC-M termination. For Use With: HexiSplit for Video.

6-ft Extension Cable with 2 BNC's

Cables 1159-006 CAB-59

6-ft extension cable w/2 x BNC-M termination. For Use With: HexiSplit for Video.

Raw Cable for HexiSplit for use with Terminations

Cables 1159 CAB-59

CAB-59 raw, for use with terminations. For Use With: HexiSplit for Video.

Five Coaxial Cabling - Plenum Rated

Cables 1143PL CAB-43

CAB 43, plenum-rated, for use with terminations. For Use With: TwinSplit for RGB, QuadSplit for RGB

100-ft Extension Cable with 10 BNC's

Cables 1143-100 CAB-43

100-ft extension cable w/10 BNC-M termination. For Use With: TwinSplit for RGB, QuadSplit for RGB.

50-ft Extension Cable with 10 BNC's

Cables 1143-050 CAB-43

50-ft extension cable w/10 BNC-M termination. For Use With: TwinSplit for RGB, QuadSplit for RGB.

25-ft Extension Cable with 10 BNC's

Cables 1143-025 CAB-43

25-ft extension cable w/10 BNC-M termination. For Use With: TwinSplit for RGB, QuadSplit for RGB.

12-ft Extension Cable with 10 BNC's

Cables 1143-012 CAB-43

12-ft extension cable w/10 BNC-M termination. For Use With: TwinSplit for RGB, QuadSplit for RGB.

Five Coaxial Cabling

Cables 1143 CAB-43

CAB-43 raw, for use with terminations. For Use With: TwinSplit for RGB, QuadSplit for RGB.

50-ft Extension Cable 2x4-Pin Mini-DIN-M

Cables 1130-050 CAB-30

50-ft extension cable w/2x4-pin mini-DIN-M preattached to cable. For Use With: TwinSplit for S-Video, HexiSplit for S-Video.

25-ft Extension Cable 2x4-Pin Mini-DIN-M

Cables 1130-025 CAB-30

25-ft extension cable w/2x4-pin mini-DIN-M preattached to cable. For Use With: TwinSplit for S-Video, HexiSplit for S-Video.

12-ft Extension Cable 2x4-Pin Mini-DIN-M

Cables 1130-012 CAB-30

12-ft extension cable w/2x4-pin mini-DIN-M preattached to cable. For Use With: TwinSplit for S-Video, HexiSplit for S-Video.

6-ft Extension Cable 2x4-Pin Mini-DIN-M

Cables 1130-006 CAB-30

6-ft extension cable w/2x4-pin mini-DIN-M preattached to cable. For Use With: TwinSplit for S-Video, HexiSplit for S-Video.

Two Mini-Coaxial Cables (0.232 inches)

Cables 1130 CAB-30

CAB-30 raw, for use with terminations. For Use With: TwinSplit for S-Video, HexiSplit for S-Video.

Raw Cable for TwinSplit for use with Terminations

Cables 1127 CAB-27

CAB-27 raw, for use with terminations and connector kits. For Use With: TwinSplit E.D. for VGA

100-ft extension cable with HD-15 M/F termination

Cables 1119-100 CAB-19

100-ft extension cable with HD-15 M/F termination. For Use With: TwinSplit for VGA, OctoSplit for VGA, QuadSplit for VGA, DeciSplit for VGA, HexiSplit for VGA, QuadSwitch for VGA

50-ft extension cable with HD-15 M/F termination

Cables 1119-050 CAB-19

50-ft extension cable with HD-15 M/F termination. For Use With: TwinSplit for VGA, OctoSplit for VGA, QuadSplit for VGA, DeciSplit for VGA, HexiSplit for VGA, QuadSwitch for VGA

25-ft extension cable with HD-15 M/F termination

Cables 1119-025 CAB-19

25-ft extension cable with HD-15 M/F termination. For Use With: TwinSplitfor VGA, OctoSplit for VGA, QuadSplit for VGA, DeciSplit for VGA,HexiSplit for VGA, QuadSwitch for VGA.

10-ft extension cable with HD-15 M/F termination

Cables 1119-010 CAB-19

10-ft extension cable with HD-15 M/F termination. For Use With: TwinSplitfor VGA, OctoSplit for VGA, QuadSplit for VGA, DeciSplit for VGA,HexiSplit for VGA, QuadSwitch for VGA.

6ft Extension cable with HD M/F termination

Cables 1119-006 CAB-19

6ft Extension cable with HD M/F termination. For Use With: TwinSplit for VGA, OctoSplit for VGA, QuadSplit for VGA, DeciSplit for VGA, HexiSplit for VGA, QuadSwitch for VGA.

VGA Termination & Connector Kit

Cables 1197 CAB-19

TERM-3 HD-15 M/F pre-attached to cable. For Use With: TwinSplit for VGA, OctoSplit for VGA, QuadSplit for VGA, DeciSplit for VGA, HexiSplit for VGA, QuadSwitch for VGA.

VGA Termination & Connector Kit

Cables 1192 CAB-19

CONN-3 HD-15 M/F connector set. For Use With: TwinSplit for VGA, OctoSplit for VGA, QuadSplit for VGA, DeciSplit for VGA, HexiSplit for VGA, QuadSwitch for VGA.

VGA Termination & Connector Kit

Cables 1119 CAB-19

CAB-19 RAW, for use with terminations and connector kit. For Use With: TwinSplitfor VGA, OctoSplit for VGA, QuadSplit for VGA, DeciSplit for VGA,HexiSplit for VGA, QuadSwitch for VGA.

3G/HD/SD-SDI Four Channel Analog Audio De-Embedder

Copperlink™ 2381 3G/HD/SD-SDI & Analog Audio Series

The Copperlink 2381 Series allows you to de-embed up to 4 channels (2 pairs) of analog line level audio from a 3G, HD or SD-SDI video signal in accordance with SMPTE standards. Convenient switches on the Copperlink 2381 de-embedder allow the operator to choose wether to extract or mute audio on a channel by channel basis.

3G/HD/SD-SDI Four Channel Analog Audio Embedder

Copperlink™ 2380 3G/HD/SD-SDI & Analog Audio Series

The Copperlink 2380 Series allows you to embed up to 4 channels (2 pairs) of analog line level audio into a 3G, HD or SD-SDI video signal in accordance with SMPTE standards. Convenient switches on the Copperlink 2380 embedder allow the operator to embed each of the two pairs of audio independently, to strip previously serialized audio, or to pass it through without modification, all on a pair by pair basis. Previously serialized data is left intact.

1x4 3G/HD/SD-SDI Distribution Amplifier

Copperlink™ 2304 3G/HD/SD-SDI Distribution Amplifier

Copperlink 3G/HD/SD-SDI copper distribution amplifier models 2302 with two outputs and the 2304 featuring four outputs. Not just another 3G/HD/SD-SDI distribution amplifier, rather, the Copperlink 2302 and 2304 offer robust SMPTE compliant performance with features rarely found in simple distribution amplifiers.

1x2 3G/HD/SD-SDI Distribution Amplifier

Copperlink™ 2302 3G/HD/SD-SDI Distribution Amplifier

Copperlink 3G/HD/SD-SDI copper distribution amplifier models 2302 with two outputs and the 2304 featuring four outputs. Not just another 3G/HD/SD-SDI distribution amplifier, rather, the Copperlink 2302 and 2304 offer robust SMPTE compliant performance with features rarely found in simple distribution amplifiers.

1x4 3G/HD/SD-SDI Optical/Copper Hybrid Optical Distribution Amplifier

Fiberlink® 8204 3G/HD/SD-SDI Optical Distribution Series

The Fiberlink 8200 Series of optical distribution amplifiers accept a 3G/HD/SD-SDI or DVB-ASI signal via BNC or its optical input and outputs it on four independently driven optical fibers. A convenient front panel switch allows the operator to toggle between the copper and the optical input sources.

1x3 3G/HD/SD-SDI Optical/Copper Hybrid Optical Distribution Amplifier

Fiberlink® 8203 3G/HD/SD-SDI Optical Distribution Series

The Fiberlink 8200 Series of optical distribution amplifiers accept a 3G/HD/SD-SDI or DVB-ASI signal via BNC or its optical input and outputs it on three independently driven optical fibers. A convenient front panel switch allows the operator to toggle between the copper and the optical input sources.

1x2 3G/HD/SD-SDI Optical/Copper Hybrid Optical Distribution Amplifier

Fiberlink® 8202 3G/HD/SD-SDI Optical Distribution Series

The Fiberlink 8200 Series of optical distribution amplifiers accept a 3G/HD/SD-SDI or DVB-ASI signal via BNC or its optical input and outputs it on two independently driven optical fiber. A convenient front panel switch allows the operator to toggle between the copper and the optical input sources.

1x1 3G/HD/SD-SDI Optical/Copper Hybrid Optical Distribution Amplifier

Fiberlink® 8201 3G/HD/SD-SDI Optical Distribution Series

The Fiberlink 8200 Series of optical distribution amplifiers accept a 3G/HD/SD-SDI or DVB-ASI signal via BNC or its optical input and outputs it on one independently driven optical fiber. A convenient front panel switch allows the operator to toggle between the copper and the optical input sources.

150 Watt Power Supply for Fiberlink Card Cage

Rackmounts 6012A Power Supply

The 6012A is a 150 watt power supply module for the 6000A Series of Fiberlink Rackmountable Card Cages.

85 Watt Power Supply for Fiberlink Card Cage

Rackmounts 6010A Power Supply

The 6010A is an 85 watt power supply module for the 6000A Series of Fiberlink Rackmountable Card Cages.

1.5 Amp Universal Power Supply

Accessories PDPS-2 1.5 Amp Universal Power Supply

The PDPS-2 Universal Power Supply provides power to Fiberlink box units requiring an external power adaptor.

1 Amp Universal Power Supply

Accessories PDPS-1 1 Amp Universal Power Supply

The PDPS-1 Universal Power Supply provides power to Fiberlink box units requiring an external power adaptor.

5002 Microtransceiver Power Supply

Accessories Power Supplies

Power supply unit for the Fiberlink 5002 Microtransceiver.

3G/HD/SD-SDI to HDMI Converter

Copperlink™ 2353 Copper 3G/HD/SD-SDI to HDMI Series

The Copperlink 2353 accepts a SMPTE compliant 3G/HD/SD-SDI input via coax, automatically detects and selects the output resolution with no scaling and converts it to HDMI. If audio is present in the SDI data stream, the operator can choose one of up to 4 pairs of stereo audio to embed into the HDMI baseband signal as well as output on the convenient audio RCA connections.

Convert Optical 3G/HD/SD-SDI to HDMI

Fiberlink® 3353 3G/HD/SD-SDI to HDMI Series

The Fiberlink 3353 Series receives SMPTE standard 3G, HD or SD-SDI signals transmitted from the Fiberlink 3350, Fiberlink 3360, or Fiberlink 3380 Series transmitters, with or without embedded audio, and converts the baseband output to HDMI. The Fiberlink® 3353 receiver provides an independent audio output providing you with the ability to separate your audio and video signals. The audio is also embedded into the HDMI cable.

Fiber Optic Termination Kit

Fiberlink® 6202 Fiber Optic Termination Kit

The Fiberlink 6202 Fiber Optic Termination Kit provides consistently reliable high-performance terminations of ST and FCPC connectors on both multimode and single mode fibers. 

Easy and fool-proof terminations can be completed in minutes, even without previous experience terminating fiber! The lightweight and portable kit includes all the tools and adapters necessary and is ideal for both field and shop use.

VGA Termination & Connector Kit

Cables 1197 CAB-19

TERM-3 HD-15 M/F pre-attached to cable. For Use With: TwinSplit for VGA, OctoSplit for VGA, QuadSplit for VGA, DeciSplit for VGA, HexiSplit for VGA, QuadSwitch for VGA.

VGA Termination & Connector Kit

Cables 1192 CAB-19

CONN-3 HD-15 M/F connector set. For Use With: TwinSplit for VGA, OctoSplit for VGA, QuadSplit for VGA, DeciSplit for VGA, HexiSplit for VGA, QuadSwitch for VGA.

VGA Termination & Connector Kit

Cables 1119 CAB-19

CAB-19 RAW, for use with terminations and connector kit. For Use With: TwinSplitfor VGA, OctoSplit for VGA, QuadSplit for VGA, DeciSplit for VGA,HexiSplit for VGA, QuadSwitch for VGA.