3G/HD/SD-SDI & 4 Channels of Analog Audio over Fiber
Fiberlink® 3381 3G/HD/SD-SDI & Analog Audio Series
The Fiberlink 3380 Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259 with the ability to embed up to 4 channels (2 pairs) of analog line level audio. Convenient switches on the 3380 Series transmitter allow the operator to embed each of the two pairs of audio independently, to strip previously serialized audio, or to pass it through without modification. At the receive end of the fiber optic link, the operator can decide which audio pairs they need de-embedded.
- Downloads
- Compatible Products
- Specifications
- Loss Budgets
Products compatible with Fiberlink® 3381 3G/HD/SD-SDI & Analog Audio Series
Scan Do® 1298 HD
The all-new Scan Do HD Scan Converter converts Digital DVI and Analog RGB, atresolutions up to 1920 x 1080, to 3G/HD/SD-SDI output, providing broadcast-quality video images.
Fiberlink® 3350 3G/HD/SD-SDI Series
The Fiberlink 3350 Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259, with or without embedded audio and data over one fiber.
Fiberlink® 3360 3G/HD/SD-SDI & AES/EBU Audio Series
The Fiberlink 3360 Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259 with the ability to embed up to 8 channels (4 pairs) of AES/EBU digital audio.
Fiberlink® 3380 3G/HD/SD-SDI & Analog Audio Series
The Fiberlink 3380 Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259 with the ability to embed up to 4 channels (2 pairs) of analog line level audio.
Fiberlink® 6404 CWDM Series
Coarse wave division multiplexers (CWDM) allow 4 fiber optic links to operate at different wavelengths over a single fiber.
Fiberlink® 6408 CWDM Series
Coarse wave division multiplexers (CWDM) allow 8 fiber optic links to operate at different wavelengths over a single fiber.
Fiberlink® 8201 3G/HD/SD-SDI Optical Distribution Series
The Fiberlink 8200 Series of optical distribution amplifiers accept a 3G/HD/SD-SDI or DVB-ASI signal via BNC or its optical input and outputs it on one independently driven optical fiber.
Fiberlink® 8202 3G/HD/SD-SDI Optical Distribution Series
The Fiberlink 8200 Series of optical distribution amplifiers accept a 3G/HD/SD-SDI or DVB-ASI signal via BNC or its optical input and outputs it on two independently driven optical fiber.
Fiberlink® 8203 3G/HD/SD-SDI Optical Distribution Series
The Fiberlink 8200 Series of optical distribution amplifiers accept a 3G/HD/SD-SDI or DVB-ASI signal via BNC or its optical input and outputs it on three independently driven optical fibers.
Fiberlink® 8204 3G/HD/SD-SDI Optical Distribution Series
The Fiberlink 8200 Series of optical distribution amplifiers accept a 3G/HD/SD-SDI or DVB-ASI signal via BNC or its optical input and outputs it on four independently driven optical fibers.
Fiberlink® FlexPOD
Fiberlink FlexPOD is a configurable passive optical signal distribution system to create up to 4 different and independent optical coarse wave division multiplexers (CWDM), wave division multiplers (WDM) and/or Splitters in 1RU!
Fiberlink® OM16 Matrix
Fiberlink Matrix is a fully configurable and SMPTE compliant 16x16 optical router. The inputs and outputs can be ordered in quantities of one and the input and output quantities do not have to match.
Fiberlink® OM32 Matrix
Fiberlink Matrix is a fully configurable and SMPTE compliant 32x32 optical router. The inputs and outputs can be ordered in quantities of one and the input and output quantities do not have to match.
Fiberlink® 3381 3G/HD/SD-SDI & Analog Audio Series Specifications
| General Specifications | |
|---|---|
Indicators |
Power, Data Rate Lock (3G, HD, SD), Audio Status, Alarm (card version only) |
Box Version Dimensions |
6.5 W x 1.15 H x 8 L (inches) |
Weight |
approx. 1 lb.; 0.45 kg |
Slots in 6000A Card Cage |
2 |
Power |
9-24 volts DC or 24 volts AC |
Operating Temperature |
-10º C to +50º C |
MTBF |
39,000 Hours |
| Audio Specifications | |
Number of Audio Channels |
4, balanced or unbalanced |
Embedding (3380) |
Selectable by group & pair; SMPTE Compliant |
SDI Pre-Embedded Audio |
All channels supported for pass-through Pairs may be stripped, passed or embedded and are selectable on pair by pair basis |
De-Embedding (3381) |
Selectable by group and channel |
Frequency Response |
20 Hz - 20 kHz, +0/-0.5 dB |
Bits-per-Sample/Sampling Rate |
24 bits; 48 kHz |
Maximum Audio Level |
+24 dBu |
SNR (A-Weighted) |
105 dB |
THD+N |
0.002%, 20 Hz - 20 kHz |
Channel Phase Differential |
±0.05º |
Crosstalk |
Min. 100 dB (1 kHz) |
Input Impedance |
600 Ohms terminated; >24 k Ohms unterminated |
Output Impedance |
50 Ohms |
Switches |
TX: Dip Switches to select input termination RX/RX: Select one of four groups TX: Embed/Pass on a per-pair basis RX: Output/Mute on a per-channel basis |
Connector |
DB-25F, TASCAM Configuration, Channels 1-4 |
| 3380 Transmitter: Serial Video BNC Input | |
Number of Inputs |
1 |
Data Rate Range |
270 Mbps to 2.97 Gbps |
Supported Standards |
SMPTE 259M, 292, 424M-2006 |
Re-clocked Data Rates |
270 Mbps (SMPTE 259M), 1.485 Gbps (SMPTE 292), 2.97 Gbps (SMPTE 424M-2006) |
Equalization |
Automatic up to 100m of Belden 1694A at 3.0 Gbps, 200m at 1.485 Gbps and 350m at 270 Mbps |
Return Loss |
>10dB up to 2.97 Gbps |
| 3380 Transmitter: Optical Output | |
SMPTE 297-2006 Labeling |
L-PC-ABCD-1310 |
Connector |
LC receptacle, PC polish or ST |
Wavelength |
1310nm (nominal) |
Emitter Type |
FP Laser |
Output Power (nominal) |
-3.5 dBm at 270 Mbps; -3.5 dBm at 1.485 Gbps; -3.5 dBm at 2.97 Gbps |
Re-clocking |
At 270 Mbps, 1.485 Gbps & 2.97 Gbps |
| 3381 Receiver: Fiber Optic Input | |
SMPTE 297-2006 Labeling |
PC-ABCD-1310-1550 |
Connector |
LC receptacle, PC polish or ST |
Wavelength |
1100 - 1620 nm |
Minimum Input Sensitivity |
-17 dBm at 2.97 Gbps; -20 dBm at 1.485 Gbps -21 dBm at 270 Mbps; |
Maximum Input Power |
0 dBm |
| 3381 Receiver: Serial Video BNC Output | |
Number of Outputs |
1 |
Signal Level |
800mV ± 10% |
DC Offset |
0V ± 0.5V |
Rise/Fall Time |
< 135 ps at 2.97 Gbps per SMPTE 424M-2006; < 270 ps at 1.485 Gbps per SMPTE 292; 0.4 ns to 1.5 ns at 270 Mbps per SMPTE 259M |
Overshoot |
< 10% of amplitude |
Timing Jitter |
< 0.2 UI at 270 Mbps; < 1.0 UI at 1.485 Gbps; < 2.0 UI at 2.97 Gbps with color bar signal |
Alignment Jitter |
< 0.2 UI at 270 Mbps; < 0.2 UI at 1.485 Gbps; < 0.3 UI at 2.97 Gbps with color bar signal |
Re-clocking |
At 270 Mbps, 1.485 Gbps & 2.97 Gbps |
Loss Budget Information
- Single Mode fiber operating at 1310nm, 2.97 Gbps Data Rate
- Distance: 30 km
- Loss: 0 - 14 dB
- Single Mode fiber operating at 1310nm, 1.485 Gbps Data Rate
- Distance: 48 km
- Loss: 0 - 17 dB
- Single Mode fiber operating at 1310nm, 270 Mbps Data Rate
- Distance: 50 km
- Loss: 0 - 20 dB
- 62.5u Multimode fiber operating at 1310nm, 2.97 Gbps Data Rate
- Distance: .8 km
- Loss: 0 - 14 dB
- 62.5u Multimode fiber operating at 1310nm, 1.485 Gbps Data Rate
- Distance: 1 km
- Loss: 0 - 17 dB
- 62.5u Multimode fiber operating at 1310nm, 270 Mbps Data Rate
- Distance: 2.5 km
- Loss: 0 - 20 dB
- 50u Multimode fiber operating at 1310nm, 2.97 Gbps Data Rate
- Distance: 1 km
- Loss: 0 - 14 dB
- 50u Multimode fiber operating at 1310nm, 1.485 Gbps Data Rate
- Distance: 1.3 km
- Loss: 0 - 17 dB
- 50u Multimode fiber operating at 1310nm, 270 Mbps Data Rate
- Distance: 3 km
- Loss: 0 - 20 dB
- Important Information:
- Distance specifications are only approximate and are not guaranteed. Operating loss budget must not be exceeded. Refer to product datasheet.
Application Diagram
Click to contact Paul Seiden, Director of Sales in US now!
55 Cabot CourtHauppauge, New York 11788 US
(813) 653-1686
Capabilities at a Glance
- 3G/HD/SD-SDI
This product supports SMPTE complaint 3G, HD and SD-SDI data rates.
- HDTV Resolutions to 1080p
This product supports HDTV resolutions of 480p, 720p and 1080p.
- Fiberlink Matrix Compatible
This product is compatible with the Fiberlink Matrix Series of optical signal routers.
- Single Mode and Multimode Fiber
This product supports both Single Mode and Multimode fiber types in the same unit with no special ordering, configuration or tweaks.
- Box and Card
This product is available in a box or card configuration.
- Analog Audio De-Embedding
This product can de-embed analog audio from the SDI signal
