CSI designs and manufactures Fiberlink® fiber optic transmission systems for video, audio and data,
Scan Do® scan converters,
Deuce® video scalers and more!
News & Press Releases
Now Shipping Fiberlink® 3360 3G/HD/SD-SDI over Fiber With AES/EBU Audio Embedding Support (12/19/2009)
The Fiberlink 3360 Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259 with the ability to embed up to 8 channels (4 pairs) of AES/EBU digital audio.
Hauppauge, New York –Communications Specialties, Inc. (CSI) announced the immediate availability of the Fiberlink 3360 Series 3G/HD/SD-SDI fiber optic transmission system with AES/EBU digital audio embedding support.
The Fiberlink 3360 Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259 with the ability to embed up to 8 channels (4 pairs) of AES/EBU digital audio. Convenient switches on the 3360 Series transmitter allow the operator to embed each of the four pairs of audio independently, to strip previously serialized audio, or to pass it through without modification. At the receive end of the fiber optic link, the operator can decide which audio pairs they need de-embedded.
Audio signals are not required to operate the Fiberlink 3360 link and it can be used as a stand-alone 3G/HD/SD-SDI optical link. Previously serialized data is left intact throughout the entire transmission process and the 3360 Series is immune to pathological signals over the entire budget link and operating temperature range.
Signals are equalized and re-clocked prior to fiber optic transmission and the 3361 receiver features a re-clocked and equalized SDI output.
The 3360 Series is compliant with SMPTE 297-2006 and has the ability to operate seamlessly with Fiberlink Matrix and other SMPTE 297-2006 fiber optic compliant devices.
Available in card versions and a small footprint box version, it is ideal for broadcast or corporate studios, OB vans, rental and staging, auditoriums, stadiums and theaters, airport or transportation hubs, distance learning, surgical or medical imaging and more!
Fiberlink® 3350 3G/HD/SD-SDI Fiber Optic System Now Shipping (12/19/2009)
The Fiberlink 3350 Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259, with or without embedded audio and data, as well as DVB-ASI over one single mode or multimode fiber.
Hauppauge, New York –Communications Specialties, Inc. (CSI) announced the immediate availability of the all-new Fiberlink 3350 Series 3G/HD/SD-SDI fiber optic transmission system.
The Fiberlink 3350 Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259, with or without embedded audio and data, as well as DVB-ASI over one single mode or multimode fiber. Signals are equalized and re-clocked prior to fiber optic transmission. The 3350 transmitter features a re-clocked and equalized SDI loop through and the 3351 receiver features two re-clocked and equalized SDI outputs.
The 3350 Series is compliant with SMPTE 297-2006 and has the ability to operate seamlessly with Fiberlink Matrix and other SMPTE 297-2006 fiber optic compliant devices.
The 3350 Series is immune to pathological signals over the entire budget link and operating temperature range.
Available in card versions and a small footprint box version, it is ideal for broadcast or corporate studios, OB vans, rental and staging, auditoriums, stadiums and theaters, airport or transportation hubs, distance learning, surgical or medical imaging and more!
CSI announces new Regional Sales Manager Territory Assignments (8/13/2009)
The new territory assignments are effective immediately.
Hauppauge, New York – Communications Specialties, Inc. (CSI) announced today new territory assignments for the Regional Sales Managers operating out of their United States offices. The new territory assignments are effective immediately. The changes are as follows:
Michael Fazzi, Regional Sales Manager Western US: Michael Fazzi has relocated to Portland, Oregon and has been assigned to the Western portion of the U.S. Michael’s new business telephone number is 503-287-3248.
John Hulen, Regional Sales Manager Midwest/Southeast: John Hulen continues to service the Midwest region and has recently been assigned to the Southeast portions of the U.S. as well. John continues to operate from the Indiana branch and his contact information remains the same and can be contact at: 317-536-5559.
Fred Scott, Director of Strategic Business Development: Fred Scott will assume the responsibilities for the Northeast portion of the U.S. Fred continues to operate from the Communications Specialties headquarters located on Long Island, New York. Fred can be contacted at 631-273-0404.
Paul Seiden, Director of Sales: Paul Seiden continues to oversee Communications Specialties’ international interests and operates from the Florida branch. Paul’s contact information remains the same: 813-653-1686.
"This territorial reassignment will allow us to be more responsive and attentive to our customers in the United States," says Paul Seiden, Director of Sales. "Covering every time zone in the country, we now have personnel staged at strategic locations to address all manner of inquires in a timely and efficient manner."
For more information on the new territory assignments, visit www.commspecial.com or contact CSI headquarters at: Phone: (631) 273-0404, Fax: (631) 273-1638 or Email: info@commspecial.com.
CSI announces Fiberlink® Matrix, a fully configurable, high performance and low cost optical routing solution! (6/15/2009)
Fiberlink Matrix 32x32 Fiber Optic Signal Router
Hauppauge, New York – Communications Specialties, Inc. (CSI) announces the Fiberlink Matrix, a fully configurable and SMPTE compliant 32x32 fiber optic signal router, today at InfoComm. Unique to the Fiberlink Matrix is the ability to configure the number of inputs and outputs in any fashion.
“This is a very important feature of the Fiberlink Matrix,” reports Paul Seiden, Director of Sales. “Now a customer can purchase an optical matrix with the exact number of inputs and outputs they require giving them the ability to precisely meet their technical and budgetary needs. If a system integrator or a/v engineer has 9 input signals that they need to route to 22 destinations, they can purchase a 9x22 Fiberlink Matrix! Traditionally, they would require a 24x24 matrix for this application, purchasing more hardware than they require.”
Available with A/V industry preferred ST connectors, or optional LC connectors, Fiberlink® Matrix is fully compliant with the extensive line of Fiberlink® products for VGA, 3G/HD/SD-SDI, composite, component and S-video, Gigabit ethernet, and much more. Fully SMPTE 297-2006 compliant for data rates up to 3 Gbps, it works with both single mode and multimode fiber without the need for separate interface cards.
The 3 RU high Fiberlink Matrix is easy to operate with the multicolored and illuminated front panel buttons and can be remotely controlled via RS-232 or the Ethernet based GUI. Critical to broadcast applications, Fiberlink Matrix supports and handles pathological signals, is SMPTE 297-2006 compliant and has redundant power supplies for maximum uptime. Fiberlink Matrix is compatible with most Fiberlink fiber optic transport systems and will function with any SMPTE 297-2006 compliant product.
CSI Announces New Scan Do® SD Scan Converter at InfoComm. Seamlessly convert DVI or Analog RGB to SD-SDI. (6/15/2009)
Scan Do® SD DVI-I to SD-SDI Scan Converter
Hauppauge, New York – Communications Specialties, Inc. (CSI) announces the new Scan Do® SD today at InfoComm. The Scan Do SD (Model 1295) converts DVI & Analog RGB computer video, up to 1920x1200, into a SMPTE standard SD-SDI signal for integration into a professional video or projection system, video conferencing system, or integration into other video distribution channels.
“We are very proud to introduce the Scan Do SD, broadcast quality scan converter,” says Paul Seiden, Director of Sales. “Our customers will be pleased to have one unit that can receive a digital or an analog input and output SMPTE compliant SD-SDI at the push of a button with no additional hardware or software, ” adds Paul.
Scan Do SD comes equipped with two copper outputs, per SMPTE 259. The unit accepts digital DVI and analog RGB input sources through its DVI-I connector and provides a convenient DVI-I Loop Through port.
The Scan Do SD can genlock to black burst and provides the operator with precision genlock phasing controls. Each Scan Do SD comes standard with rich features such as Pan, Zoom, push-button Preset creation, storage and recall, EDID capture and storage, and an intuitive HTML-based Graphical User Interface (GUI).
The operator can command and control all of the Scan Do SD’s functionality by utilizing RS-232 or the HTML-based GUI. The unit’s firmware and GUI interface is field upgradeable via the Ethernet port.
CSI Announces Fiberlink® 3620 Series of Composite Video & Audio Fiber Optic Extenders. (6/15/2009)
Compatible with Fiberlink Matrix!
Hauppauge, New York – Communications Specialties, Inc. (CSI) announces the Fiberlink® 3620 Series of Composite Video and Stereo Audio fiber optic extenders today at InfoComm. The all-digital Fiberlink 3620 series transmits high-quality composite video with a video bandwidth of 10 MHz per channel and is compatible with NTSC, PAL or SECAM. The two audio channels may be user configured for balanced or unbalanced inputs and outputs.
Compatibility with the Fiberlink Matrix 32x32 optical router allows for complex system architectures.
Fiberlink 3620 uses one single mode or multimode fiber optic core and is available in both box and card versions. The Fiberlink 3620 features a switch selectable audio output gain boost of +0 dB or +6 dB and indicator lights for power, video and audio quickly reveal the units state of operation.
“Composite video remains an important signal type in many professional a/v applications and the Fiberlink 3620 Series directly complements our already expansive line of VGA, DVI, 3G/HD/SD-SDI, Composite Video, Component Video, S-Video, and other fiber optic extenders,” says Paul Seiden, Director of Sales.
The Fiberlink 3620 Series is ideally suited for videoconferencing, digital signage, corporate a/v, broadcast and cable TV applications.
CSI Shipping Fiberlink® 5100 Series of Fiber Optic Ethernet Extenders (5/29/2009)
Transport 10/100/1000 Base-T Ethernet over one or two single mode or multimode fiber optic cores!
Hauppauge, New York – Communications Specialties, Inc. (CSI) is now shipping the Fiberlink 5100 Series to transport 10/100/1000 Base-T Ethernet over one or two single mode or multimode fiber optic cores. The units come equipped with auto-sensing 10/100/1000 Mbps Ethernet ports with auto MDIX and supports full and half duplex modes.
The Fiberlink 5100 Series transmitters and receivers feature LEDs to indicate link activity, SPD, fault detection, collisions and power.
“We are excited to offer our customers a versatile and cost-effective fiber optic Ethernet extension product,” says Paul Seiden, Director of Sales. “This product directly compliments our comprehensive line of fiber optic data extender products as well as our products that transmit data, video and audio."
The Fiberlink 5100 Series is ideal for any application that requires reliable and pristine transmission of Ethernet over short or long distances including Broadcast, Pro A/V and IT applications. The product is available for immediate shipment.
For more information on the complete line of Fiberlink® fiber optic transmission systems, visit www.commspecial.com or contact CSI headquarters at: Phone: (631) 273-0404, Fax: (631) 273-1638 or Email: info@commspecial.com.
CSI Announces Fiberlink® 3350 3G/HD/SD-SDI Fiber Optic System (4/21/2009)
The Fiberlink 3350 Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259, with or without embedded audio and data, as well as DVB-ASI over one single mode or multimode fiber.
Today at NAB, Communications Specialties, Inc. (CSI) announced the Fiberlink 3350 Series 3G/HD/SD-SDI fiber optic transmission system.
The Fiberlink 3350 Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259, with or without embedded audio and data, as well as DVB-ASI over one single mode or multimode fiber. Signals are equalized and re-clocked prior to fiber optic transmission. The 3350 transmitter features a re-clocked and equalized SDI loop through and the 3351 receiver features two re-clocked SDI outputs.
The 3350 Series is compliant with SMPTE 297-2006 and has the ability to operate seamlessly with Fiberlink Matrix and other SMPTE 297-2006 fiber optic compliant devices.
“When you are dealing with high resolution signals such as 1080p, it is critical to the broadcast professional that the signal fidelity remains intact throughout not just the fiber optic transport, but throughout the electrical components within the transmitter and receiver,” states John Lopinto, President and CEO. “By strictly adhering to SMPTE standards and designing precision equalization and signal re-clocking technologies into this product, the Fiberlink 3350 Series delivers that level of confidence… and 3G-SDI, of course.”
The 3350 Series is immune to pathological signals over the entire budget link and operating temperature range.
Available in card versions and a small footprint box version, it is ideal for broadcast or corporate studios, OB vans, rental and staging, auditoriums, stadiums and theaters, airport or transportation hubs, distance learning, surgical or medical imaging and more!
CSI unveils Fiberlink® 3360 3G/HD/SD-SDI over Fiber With AES/EBU Audio Embedding Support (4/21/2009)
The Fiberlink 3360 Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259 with the ability to embed up to 8 channels (4 pairs) of AES/EBU digital audio.
At NAB 2009, Communications Specialties, Inc. (CSI) announced the Fiberlink 3360 Series 3G/HD/SD-SDI fiber optic transmission system with AES/EBU digital audio embedding support.
The Fiberlink 3360 Series allows you to transmit 3G, HD or SD-SDI as per SMPTE 424M-2006, 292 and 259 with the ability to embed up to 8 channels (4 pairs) of AES/EBU digital audio. Convenient switches on the 3360 Series transmitter allow the operator to embed each of the four pairs of audio independently, to strip previously serialized audio, or to pass it through without modification. At the receive end of the fiber optic link, the operator can decide which audio pairs they need de-embedded.
Audio signals are not required to operate the Fiberlink 3360 link and it can be used as a stand-alone 3G/HD/SD-SDI optical link. Previously serialized data is left intact throughout the entire transmission process and the 3360 Series is immune to pathological signals over the entire budget link and operating temperature range.
“Broadcast professionals have come to rely upon the Fiberlink Series of SDI fiber optic transmission systems,” says Paul Seiden, Director of Sales. “The addition of digital audio capabilities to our 3G/HD/SD-SDI fiber optic products enhances our already comprehensive line of optical broadcast products.”
Signals are equalized and re-clocked prior to fiber optic transmission and the 3361 receiver features a re-clocked SDI output.
The 3360 Series is compliant with SMPTE 297-2006 and has the ability to operate seamlessly with Fiberlink Matrix and other SMPTE 297-2006 fiber optic compliant devices.
CSI announces Fiberlink® Matrix Broadcast Quality Optical Router (4/20/2009)
Fiberlink Matrix, a fully configurable and SMPTE compliant 32x32 fiber optic signal router
Communications Specialties, Inc. (CSI) announced the Fiberlink Matrix, a fully configurable and SMPTE compliant 32x32 fiber optic signal router, today at NAB. Unique to the Fiberlink Matrix is the ability to configure the inputs and outputs in any fashion.
“This is a very important feature of the Fiberlink Matrix,” reports Paul Seiden, Director of Sales. “Now a customer can purchase an optical matrix with the exact number of inputs and outputs they require giving them the ability to precisely meet their technical and budgetary needs. If a broadcast engineer has 9 input signals that they need to route to 22 destinations, they can purchase a 9x22 Fiberlink Matrix! Traditionally, they would require a 24x24 matrix for this application, purchasing more hardware than they require.”
The 3 RU high Fiberlink Matrix is easy to operate with the multicolored and illuminated front panel buttons and can be remotely controlled via RS-232 or the Ethernet based GUI. Fiberlink Matrix can be configured with ST or LC connectors and is SMPTE 297-2006 compliant. Critical to broadcast applications, Fiberlink Matrix supports and handles pathological signals and has redundant power supplies for maximum uptime. Fiberlink Matrix is compatible with most Fiberlink fiber optic transport systems and will function with any SMPTE 297-2006 compliant product.
CSI Announces the industry’s first 3G-SDI Scan Converter at NAB (4/20/2009)
The all new Scan Do® HD converts DVI & Analog RGB to 3G/HD/SD-SDI
Communications Specialties, Inc. (CSI) announced an all new Scan Do® HD today at NAB. The Scan Do HD (Model 1298) converts DVI & Analog RGB computer video, up to 1920x1200, into a SMPTE standard 3G, HD, or SD-SDI signal for on air broadcast, integration into a professional video system, or integration into other broadcast distribution channels.
“We are very proud to introduce the industry’s first 3G capable, broadcast quality scan converter,” says Paul Seiden, Director of Sales. “Our customers will be pleased to have one unit that can receive a digital or an analog input and output SMPTE compliant SD, HD or 3G-SDI at the push of a button. This level of flexibility is very important because the broadcast professional may be using 1080i for their broadcast distribution, but they require the 1080p resolutions that only 3G can provide for their other digital distribution channels, ” adds Paul.
Scan Do HD comes equipped with two copper outputs, per SMPTE 424M-2006, 292 and 259, and one SMPTE 297-2006 compliant fiber optic output. The unit accepts digital DVI and analog RGB input sources through its DVI-I connector and provides a convenient DVI-I Loop Through port.
CSI Rebrands Pure Digital Fiberlink Product Line (3/19/2009)
The industry’s largest selection of fiber optic products is now known as “Fiberlink”
Hauppauge, New York – Communications Specialties, Inc. (CSI) announced today that they are consolidating their two fiber optic product lines, Fiberlink and Pure Digital Fiberlink, into one cohesive entity known as Fiberlink®.
“We have a brilliant brand in Fiberlink with excellent industry-wide recognition,” states Derek Miranda, Director of Marketing. “Our customers have always referred to each of our fiber optic offerings as Fiberlink. It was time to strengthen our connection to our customers through a strong, homogenous and recognizable brand.”
“There was a time when it was very important to clearly differentiate the two core fiber optic technologies that we provided to our customers, digital and analog, because we have always been at the forefront of the technology,” says John Lopinto, President and CEO. “Now that digital fiber optic technology has become the foundation for all of our fiber optic products, maintaining two brands is no longer necessary.”
Nothing about the products themselves have changed and CSI continues to offer the analog fiber optic products that their customers have come to rely upon.
Home
| CSI China
| CSI Japan | Terms of Use
| Privacy Policy
©2010 Communications Specialties, Inc. All Rights Reserved
Version 1.5 | 3/9/2009