WORLD HEADQUARTERS

55 Cabot Court

Hauppauge, NY 11788

TEL: (631) 273-0404 FAX: (631) 273-1638

WWW: http://www.commspecial.com

EMAIL: info@commspecial.com

Communications Specialties Pte Ltd

Serving the Asia Pacific Region

100 Beach Road

#22-09 Shaw Tower

Singapore 189702

TEL: +65 6391 8790 FAX: +65 6396 0138

email: csiasia@commspecial.com

Copyright © 2001

P/N 121532 Rev. C

Deuce SDQ

User's Manual



TABLE OF CONTENTS

Introduction_______________________________________________________ 2

Installation _______________________________________________________ 3

Operation ________________________________________________________ 4

Output Timing Specifications _________________________________________ 5

Troubleshooting ___________________________________________________ 6

Accessories _______________________________________________________ 6

Rear Connector Pin-outs _____________________________________________ 7

User and Certification Information _____________________________________ 8

Statement of Warranty ______________________________________________ 8

INCLUDED WITH THIS PRODUCT YOU SHOULD HAVE:

1 -

Deuce

®

SDQ

Intelligent Video Scaler

1 - AC power line cord

1 - 12 foot composite video input cable

1 - 12 foot S-Video input cable

1 - User’s Manual

1 - Product Registration card

AVAILABLE OPTIONAL ACCESSORIES:

• 15-pin VGA adapter cables for

Deuce SDQ’s

VGA output

• AC line cords for North America, Japan, or Europe

• Rackmounting kits

Deuce

is a registered trademark of Communications Specialties, Inc.

Deuce SDQ

User's Manual

Page 1



INTRODUCTION

Thank you for purchasing

Deuce SDQ,

the Intelligent Video Scaler. With Deuce SDQ, you now have the ability to

enjoy high-resolution, film-like images from any standard video source, including broadcast or cable TV, video tape,

DVD and laser disc. Deuce SDQ offers a unique, automatic

Motion Compensation

feature that will adapt to the specific

type of input source image.

When viewing NTSC sources, Deuce SDQ's motion compensation feature automatically selects one of three different

motion compensation techniques: adaptive frame (inverse 3:2 pulldown) for original film material, vertical temporal

and static mesh. (When viewing PAL sources, inverse 3:2 pulldown is not applicable.) Because each technique is set

specifically for the type of input image, the result is the clearest, crispest picture quality possible, making Deuce SDQ

ideal for Home Theater and Professional A/V applications. Packed with other great features such as three scaled output

resolutions (800x600, 1024x768 and 1280x1024) and standard line doubling and quadrupling outputs, Deuce SDQ

is one incredibly versatile scaler. Additional features include Composite, S-Video and Y-C

B

-C

R

component inputs and

RGB or Y-C

B

-C

R

component outputs, plus an RS-232 remote. An internal power supply and simple, intuitive user-

interface round out this sleek, compact unit.

Like all products from Communications Specialties, Deuce SDQ comes with our continuing commitment to provide

support. In order to assist us in this process, please be sure to mail in your product registration card. This will make

it easier for us to notify you with any new product announcements or other information concerning our product line.

Should you need to contact us for support, our office is open Monday through Friday, from 8:30 AM to 5:00 PM Eastern

Time. We also offer a comprehensive web site for your added convenience. (www.commspecial.com)

Thank you for choosing Deuce SDQ. As always, we welcome your comments and suggestions.

Communications Specialties, Inc.

55 Cabot Court

Hauppauge, N.Y. 11788 USA

Tel: (631) 273-0404

Fax: (631) 273-1638

Email: info@commspecial.com

Customers in the Asia Pacific Region should contact:

Communications Specialties Pte Ltd

100 Beach Road

#22-09 Shaw Tower

Singapore 189702

Tel: +65 6391 8790

Fax: +65 6391 0138

Email: csiasia@commspecial.com

www.commspecial.com

Page 2

Deuce SDQ

User's Manual



INSTALLATION

INSTALLATION STEPS:

1.

Connect the provided AC power cord into the connector marked Power on the rear of Deuce SDQ and plug

the other end into an AC outlet. This is an auto-sensing universal input power supply and is compatible with

worldwide standards.

Connect a video source to either the COMPOSITE, S-VIDEO or COMPONENT input on the rear panel.

Connect a computer monitor, projector or display to the VGA compatible connector on the rear panel.

2.

3.

AVAILABLE OUTPUTS:

There are three output configurations available on the output VGA connector: RGBHV, RGBS and Y-C

B

-C

R

. The rear

panel switch next to the output connector selects one of the three output types. The individual signals on the HD-15

connector are defined on page 7. Rear connector pin-outs for the output configuration are selected by this switch.

REMOTE CONTROL:

Deuce SDQ provides for a hard-wired RS-232 remote control connection using a 3-pin Phoenix-type connector on the

rear panel. The baud rate is 9600 baud, no parity, 1 start bit, 1 stop bit. The pin out is as follows:

1 - Ground

2 - Receive Data

3 - Transmit Data

Please refer to the accompanying manual, "RS-232 Remote Control Protocol" or our web site at

www.commspecial.com for detailed specifications on the command structure for this remote control part.

Deuce SDQ

User's Manual

Page 3



OPERATION

Deuce SDQ is designed to operate properly with any projector or display while requiring minimal set-up and

adjustments.

SELECTING AN INPUT:

There are three buttons on the front panel for directly selecting one of the three inputs. The LED that is lit indicates

the active selection. The three input options are:

Video (composite)

S-Video (Y/C)

Y-C

B-

C

R

(component)

SELECTING AN OUTPUT FORMAT:

Deuce SDQ provides the five output formats listed below. Pressing the output format button on the front panel will

cycle through the choices. The LED that is lit indicates the current output format.

800 x 600

1024 x 768

1280 x 1024

Line double

Line quadruple

MOTION COMPENSATION:

The automatic motion compensation feature will analyze the input source and choose the appropriate compensa-

tion. Deuce SDQ will automatically select between inverse 3:2 pulldown (adaptive frame), vertical temporal and

static mesh modes. With a PAL input, inverse 3:2 pulldown is not used.

SPECIAL KEY FUNCTIONS:

There are several functions that can be activated by pressing a combination of keys simultaneously:

Key Panel Lockout:

Press the VIDEO and S-VIDEO buttons at the same time to lock out the key panel.

Key Panel Unlock:

Press the S-VIDEO and COMPONENT buttons at the same time to unlock the key panel and

allow normal operation.

System Reset:

Press the COMPONENT and the OUTPUT FORMAT buttons at the same time to reset the unit and

return all settings to their factory defaults.

Page 4

Deuce SDQ

User's Manual



OUTPUT TIMING SPECIFICATIONS

The timing specifications for the five output formats follow VESA specifications where applicable.

OUTPUT FORMAT

800 x 600

1024 x 768

1280 x 1024

Line Double

Line Quadruple

INPUT TYPE

NTSC

PAL

NTSC

PAL

NTSC

PAL

NTSC

PAL

NTSC

PAL

H(kHz)

37.7

31.4

48.4

40.3

63.9

53.3

31.5

31.3

63.0

62.5

V(Hz)

59.94

50

59.94

50

59.94

50

59.94

50

59.94

50

Deuce SDQ

User's Manual

Page 5



TROUBLESHOOTING

IF THIS IS YOUR PROBLEM:

THEN CHECK TO SEE:

Nothing works or

no video output:

Are any of the LEDs lit? Is the Deuce SDQ plugged into the AC wall outlet?

Is video source connected to the unit and is it putting out a video signal

as viewed on a video monitor?

Is the VCR or video source in the proper mode to output video as

required?

Have you selected the proper input on the unit (VIDEO, S-VIDEO or

COMPONENT) for the source selected as the active input?

Is the source of the video ON?

There is video on the output

display but it appears out of sync:

If you are using 5 BNC or RCA connectors to the output display, try

reversing the H and V sync connectors.

Make sure the display is capable of supporting the resolution you selected

on the front of the unit. Try a lower resolution.

ACCESSORIES

The following accessories are available for

Deuce SDQ.

They may be ordered from your dealer or from

Communications Specialties. If you need an accessory that isn’t listed below or have a specific application for which

you need assistance, please give us a call.

Item #

1240

1241

1119-006

1119-025

1119-050

1119-100

1206

Description

Single rackmount kit. This kit allows one

Deuce SDQ

to be rackmounted.

Double rackmount kit. This kit allows two

Deuce SDQ

to be rackmounted.

6 ft. VGA extension cable

25 ft. VGA 15-pin M/F output extension cable

50 ft. VGA 15-pin M/F output extension cable

100 ft. VGA 15-pin M/F output extension cable

6 ft. HD-15 male to 5x BNC cable

Custom cable lengths are available. Call for information.

Page 6

Deuce SDQ

User's Manual



REAR CONNECTOR PIN-OUTS

VGA COMPATIBLE OUTPUT:

(HD-15 CONNECTOR)

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

1

2

3

4

RGBHV

Red

Green

Blue

n/c

Ground

Ground

Ground

Ground

n/c

Ground

n/c

n/c

H-Sync out

V-Sync out

n/c

RGBS

Red

Green

Blue

n/c

Ground

Ground

Ground

Ground

n/c

Ground

n/c

n/c

Composite sync

n/c

n/c

Y-C

B

-C

R

C

R

Y

C

B

n/c

Ground

Ground

Ground

Ground

n/c

Ground

n/c

n/c

n/c

n/c

n/c

S-VIDEO INPUT:

Ground

Ground

Luminance

Chrominance

Y in

Ground

C

B

in

Ground

C

R

in

Ground

Composite video in

Ground

Ground

Receive data

Transmit data

COMPONENT INPUT:

(3 FEMALE RCA CONNECTORS)

Y center

Y outer

C

B

center

C

B

outer

C

R

center

C

R

outer

center

outer

1 (left)

2 (middle)

3 (right)

VIDEO INPUT:

(FEMALE RCA CONNECTOR)

RS-232 REMOTE:

Deuce SDQ

User's Manual

Page 7



USER & CERTIFICATION INFORMATION

FCC STATEMENT

WARNING:

This equipment generates, uses and can radiate radio frequency energy and

if not installed and used in accordance with the instruction manual, may cause interfer-

ence to radio communications. It has been tested and found to comply with the limits

for a Class A computing device pursuant to Subpart B of Part 15 of FCC Rules, which

are designed to provide reasonable protection against such interference when operated

in a commercial environment. Operation of this equipment in a residential area is likely

to cause interference in which case the user, at his own expense, will be required to take

whatever measures may be required to correct the interference.

This product meets requirements for category E4 equipment utilizing the sample,

limits and methods described in AECO Test Report Number STR-19801-1.

Standards to which conformity is declared: EN 55103-1:1996 EN 55103-2:1997

UL INFORMATION

CE INFORMATION

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRONIC SHOCK, DO NOT EXPOSE THIS APPLIANCE

TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

This symbol warns the user of uninsulated volt-

age within the unit that can cause

dangerous electronic shocks.

CAUTION: TO REDUCE THE RISK OF ELECTRONIC

SHOCK, DO NOT REMOVE COVER. NO USER

SERVICABLE PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

This symbol alerts the user that there are important

operating and maintenance instructions in the litera-

ture accompanying this unit.

WARRANTY

Communications Specialties, Inc. (CSI) warrants that for a period of three (3) years after purchase by the Buyer,

Deuce SDQ

will be free from defects in material and workmanship under normal use and service. A Return Material Authorization (RMA)

number must be obtained from CSI before any equipment is returned by the Buyer. All material must be shipped to CSI at the

expense and risk of the Buyer.

CSI’s obligation under this warranty will be limited, at its option, to either the repair or replacement of defective units, including

free materials and labor. In no event shall CSI be responsible for any incidental or consequential damages or loss of profits or

goodwill.

CSI shall not be obligated to replace or repair equipment that has been damaged by fire, war, acts of God, or similar causes,

or equipment that has been serviced by unauthorized personnel, altered, improperly installed or abused.

RMA numbers and repairs can be obtained by contacting our sales department or by visiting our web site:

http://www.commspecial.com

Communications Specialties, Inc.

55 Cabot Court

Hauppauge, N.Y. 11788 USA

Tel: (631) 273-0404

Fax: (631) 273-1638

Email: info@commspecial.com

Customers in the Asia Pacific Region should contact:

Communications Specialties Pte Ltd

100 Beach Road

#22-09 Shaw Tower

Singapore 189702

Tel: +65 6391 8790

Fax: +65 6396 0138

Email: csiasia@commspecial.com

Please have your serial number (located underneath Deuce SDQ) available when contacting us.

Page 8

Deuce SDQ

User's Manual



RS-232 REMOTE CONTROL PROTOCOL

WORLD HEADQUARTERS

55 Cabot Court

Hauppauge, NY 11788

TEL: (631) 273-0404 FAX: (631) 273-1638

WWW: http://www.commspecial.com

EMAIL: info@commspecial.com

Communications Specialties Pte Ltd

Serving the Asia Pacific Region

100 Beach Road

#22-09 Shaw Tower

Singapore 189702

TEL: +65 6391 8790 FAX: +65 6396 0138

email: csiasia@commspecial.com

Copyright © 2001

P/N 121533 Rev. C

Deuce SDQ RS-232 Protocol



Communications Specialties, Inc.

55 Cabot Court

Hauppauge, NY 11788 USA

TEL: (631) 273-0404

FAX: (631) 273-1638

WWW: http://www.commspecial.com

EMAIL: info@commspecial.com

CONTENTS

Introduction ................................................................................ 2

Operation ................................................................................. 2-3

Remote Command Table ............................................................ 4

INTRODUCTION

Communications Specialties Pte Ltd

100 Beach Road

#22-09 Shaw Tower

Singapore 189702

TEL: +65 6391 8790

FAX: +65 6396 0138

EMAIL: csiasia@commspecial.com

Thank you for purchasing Deuce



SDQ. This manual only

includes information regarding the RS-232 Remote Control Protocol

for Deuce SDQ. For complete operating instructions, please refer to

the User’s Manual that came with your unit.

Should you need to contact us for support, our office is open

Monday through Friday, from 8:30 AM to 5:00 PM Eastern Time.

We also offer a comprehensive web site for your added conve-

nience.

Thank you for choosing Deuce SDQ. As always, we welcome

your comments and suggestions.

OPERATION

COMMUNICATION